Schaub Sabre edge pull 5 inch CC describes a Schaub and Company handle designed as an edge pull, so it mounts along the door or drawer edge and gives a clean, minimal grip point for cabinets or furniture. The 5 inch center-to-center measurement fixes the distance between screw holes, helping match drilling layouts or create consistent spacing across a run of fronts. The overall 6-1/4 inch length extends slightly beyond the hole pattern, giving more finger contact for opening while keeping the profile compact. The satin brass finish provides a warm metallic tone with reduced sheen, which helps it sit comfortably with many decorative hardware selections while controlling fingerprints. Being part of the Handles and Pulls, Schaub class within Decorative Hardware and Moldings positions this pull for visible applications where appearance and uniform sizing matter across a project.
This edge pull relies on a 5 inch center-to-center screw layout, so the holes line up along the mounting edge and keep the pull square to the door or drawer. The specified #8 x 5/8 inch flat head sheet metal screw seats into countersunk points on the pull, allowing the head to sit flush and the handle to rest tight against the surface. The 6-1/4 inch length leaves material beyond the fasteners, which helps distribute user force along the pull body rather than concentrating it only at the screw points. The satin brass finish is applied to the visible surfaces, so the mounted pull presents a continuous brass appearance from edge to edge.
This Schaub and Company edge pull belongs to the Handles and Pulls, Schaub product class, aligning it with decorative cabinet and furniture work where hardware is a visible design element. The satin brass finish lets it coordinate with other satin brass components in Decorative Hardware and Moldings, supporting a unified appearance on doors, drawers, and panels. As an edge pull, it is suited for fronts where a low-profile grip is preferred along the working edge rather than on the face, which can help maintain flat-panel or modern designs. The 5 inch center-to-center layout matches projects that standardize around this hole spacing, making it useful when multiple doors or drawers share a common drilling jig. With its 6-1/4 inch overall length, the pull visually balances medium-width fronts, providing proportion without overwhelming narrower pieces.
The fixed 5 inch center-to-center dimension allows consistent layout from piece to piece, supporting straight lines of pulls across banks of drawers or doors. The 6-1/4 inch total length means that, once the screw holes are set, the same reveal of pull body extends beyond each end, helping installers produce uniform visual margins. The satin brass finish reduces glare compared with brighter polishes, which can make the hardware read more evenly under a range of lighting conditions on site. Because the pull uses #8 x 5/8 inch flat head sheet metal screws, the fastener size, head style, and depth are predefined, reducing guesswork about the interface between the pull and the mounting substrate. As an edge pull, its geometry focuses gripping force along the front edge, which can support smooth operation of doors and drawers while keeping the hardware line tight to the surface.
The edge pull has a 5 inch center-to-center screw spacing and a 6-1/4 inch overall length, which defines both drilling layout and the visible length across the cabinet edge.
The Schaub Sabre edge pull uses a satin brass finish, giving a warm brass tone with moderated shine for decorative hardware applications.
The 5 inch center-to-center spacing standardizes the distance between screw holes, so drilling jigs and layouts can repeat accurately across multiple fronts.
The pull is specified with #8 x 5/8 inch flat head sheet metal screws, which defines the shank size, length, and head style for the mounting interface.
With 6-1/4 inch overall length and 5 inch center-to-center spacing, the pull extends beyond the holes, giving added gripping area along the edge.
This satin brass edge pull is manufactured by Schaub and Company, identified by manufacturer part number 10012-US4 within their decorative hardware line.
The Schaub Sabre edge pull 5 inch CC satin brass combines a defined 5 inch center-to-center layout, a 6-1/4 inch overall length, and a satin brass finish to support consistent cabinetry lines. For projects organized around satin brass Decorative Hardware and Moldings, this pull offers a matching edge-mounted option that keeps faces streamlined. When a job calls for a Schaub and Company handle within the Handles and Pulls, Schaub class, this 10012-US4 edge pull gives clear dimensional and screw specifications for planning layouts and drilling on cabinets, furniture, or built-ins.