Schaub Baker edge pull gives a low-profile way to open doors and drawers while keeping fronts clear, which suits projects that call for a modern, streamlined look. The matte black finish provides a dark, even tone that visually anchors lighter cabinets and contrasts with many wood species, so layouts gain definition without relying on bulky hardware. This pull is identified as 5 inch center-to-center, so the drilled holes land 5 inches apart, which guides layout on new work and helps when matching an existing 5 inch pattern. Overall length is listed as 6-1/4 inches, so the pull overhangs beyond the screw points, which helps with hand grip and visual proportion on wider drawer fronts. Schaub and Company branding signals a coordinated Baker family style, so multiple pulls across a room can share the same profile and finish.
The 5 inch center-to-center dimension defines where to drill mounting holes, so layout remains consistent when repeating this pull across cabinet banks or drawer stacks. With 6-1/4 inch total length, there is a known distance from mounting holes to the ends, which allows installers to position the pull relative to the cabinet edge or rail profile with predictable reveals. Thread and screw size is specified as #8 x 5/8 inch flat head sheet metal screw, so the mounting interface is sized for a #8 shank and a countersunk flat head, which supports flush seating inside the pull and solid bite into typical cabinet materials.
This Schaub Baker edge pull, categorized as a handle and pull in decorative hardware and moldings, is suited to applications where the hardware needs to sit along an edge rather than on the center panel, because the edge pull format works from the perimeter of the door or drawer. The matte black finish plays into design schemes needing a dark linear detail, so it can visually frame lighter painted or stained fronts when used in consistent rows. With its 6-1/4 inch length tied to a 5 inch center-to-center, the pull scales well on mid-size cabinet doors and standard drawers, giving enough span to read as a deliberate design line without overwhelming the front. As part of the Schaub handles and pulls class, this piece aligns with other Schaub offerings, which helps maintain a unified look in spaces that mix different pull sizes while staying within the same aesthetic family.
The specified 5 inch center-to-center dimension lets installers use standard 5 inch drilling templates, which speeds layout and reduces rework across large kitchens or banked casework. Because the full length is defined at 6-1/4 inches, installers can calculate exact overhang beyond the fastener points, which helps when aligning multiple pulls at precise distances from door edges or rails. The #8 x 5/8 inch flat head sheet metal screw callout sets expectations for thread engagement length, which supports firm mounting in typical cabinet materials while keeping screw depth compact. The flat head style works with countersunk pull holes, so the screw heads sit flush and do not interfere with hand contact at the edge. The clear identification as Schaub Baker edge pull and manufacturer part 10022-MB also helps maintain consistency across replacements, because each future pull can match this exact size, finish, and mounting pattern.
The Schaub Baker edge pull has a 5 inch center-to-center measurement, which sets the spacing between mounting holes for drilling and alignment.
The edge pull is specified at 6-1/4 inches total length, which defines the span across the cabinet front and its proportion on doors or drawers.
The pull is finished in matte black, providing a dark, non-reflective look that creates contrast lines on many cabinet colors.
The pull is specified for #8 x 5/8 inch flat head sheet metal screws, so the mounting holes and countersink are sized for that format.
The 10022-MB is a Schaub Baker edge pull classified under decorative hardware handles and pulls, used to operate cabinet doors and drawers.
The 5 inch center-to-center spacing matches common drilling templates, which supports fast, repeatable mounting across multiple cabinet fronts.
The Schaub Baker edge pull, 5 inch center-to-center in matte black, combines a defined 6-1/4 inch length with a clearly specified #8 x 5/8 inch flat head sheet metal screw interface, so layouts can be planned around known measurements. For projects calling for an edge-operated pull in a dark, even finish, this handle and pull from Schaub and Company offers a consistent pattern that can be repeated across doors and drawers. When the design calls for a 5 inch center-to-center edge pull in matte black, this 10022-MB model from Wurth Baer Supply is a precise match to that requirement.