Schaub Baker edge pull gives you a polished nickel pull designed for a modern edge-grip installation, so doors and drawers get a clean-lined handle point right at the front edge. The 5 inch center-to-center layout establishes a consistent drill pattern across multiple fronts, which helps keep rows of doors visually aligned. Overall 6-1/4 inch length provides extra hand contact beyond the mounting points, which supports a confident grip on wider drawers or heavier fronts. The polished nickel finish delivers a bright, reflective surface, which adds contrast against painted or stained cabinetry for clear handle visibility. Schaub and Company branding identifies the pull as part of a decorative hardware line, which helps match this piece to other Baker series pulls in the same project. Manufacturer part number 10022-PN ties this exact pull to drawings, order lists, and service documentation on repeat jobs.
The 5 inch center-to-center layout on this Schaub Baker edge pull sets the distance between fastener points, which determines the drilling pattern on each cabinet front. With 6-1/4 inch overall length, the pull extends slightly beyond the mounting line, which leaves more surface to grasp when installed at the edge of doors and drawers. The edge pull format is intended to sit at the working edge of the front, which positions the grip where fingers naturally reach to open. Polished nickel finish on the pull surface supports smooth hand contact during use, which is important when this becomes the primary opening point on frequently used cabinets.
This Schaub Baker edge pull is part of the Handles and Pulls category, which situates it within decorative cabinet hardware for doors and drawers. The polished nickel finish suits projects that call for a reflective metal accent, which can coordinate with hinges, latches, or other bright nickel hardware on the job. With a 5 inch center-to-center dimension, the pull suits cabinet layouts that favor a slightly wider grip span, which can look balanced on medium to larger drawer fronts. Overall length of 6-1/4 inch provides visual presence on the edge of the front, which can help this pull read correctly on taller cabinet doors. The decorative hardware and moldings classification aligns this pull with visible, finished surfaces, which positions it as a front-facing hardware choice rather than a concealed component.
The defined 5 inch center-to-center spacing on this Baker edge pull supports repeatable drilling across cabinet runs, which helps installers keep handle rows straight and evenly spaced. Specified 6-1/4 inch overall length gives a reliable outer dimension to reference when aligning pulls to stiles, rails, or panel reveals, which streamlines layout on shop drawings. The polished nickel surface reflects light, which highlights any misalignment, so using the stated dimensions as layout references helps achieve a neat grid of pulls. Listing the thread and screw size as #8 x 5/8 inch flat head sheet metal screw identifies the fastener interface at the pull, which allows installers to match screw size to typical cabinet door or drawer front thickness. The Manufacturer Part # 10022-PN connects this exact pull to ordering and reordering, which simplifies maintaining consistency across future phases or replacement work.
The Schaub Baker edge pull has a 5 inch center-to-center dimension, which sets the hole spacing for drilling and keeps mounting points consistent from one cabinet front to another.
The Schaub Baker edge pull measures 6-1/4 inch in overall length, which offers extra grip area beyond the screw locations for comfortable operation on doors and drawers.
This edge pull has a polished nickel finish, which provides a bright, reflective appearance that pairs well with other polished nickel cabinet hardware in the same project.
The edge pull is specified with a #8 x 5/8 inch flat head sheet metal screw interface, which defines the screw diameter and length suited to the pull's mounting holes.
The 10022-PN edge pull is manufactured by Schaub and Company, which identifies the decorative hardware line this pull belongs to for coordinated cabinet projects.
This product is an edge pull, intended to mount at the door or drawer edge so fingers engage the pull right where the front opens, supporting a clean, modern look.
This Schaub Baker edge pull in polished nickel combines a 5 inch center-to-center pattern with a 6-1/4 inch overall length, giving installers clear dimensions for repetitive drilling and alignment. The edge pull format focuses grip at the cabinet front edge, which suits modern, minimal fronts where projection stays tight to the face. With thread and screw size specified as #8 x 5/8 inch flat head sheet metal screw, the mounting interface is clearly defined at the pull. Using Manufacturer Part # 10022-PN when ordering from Wurth Baer Supply ties this exact decorative pull to drawings and schedules on current and future cabinet runs.