Schaub Baker edge pull gives a low-profile grip on cabinet or furniture edges using a 5 inch center-to-center hole spacing, which helps align multiple pulls in a straight, consistent run. The pull is made in unlacquered brass, so the metal surface remains exposed, allowing the brass to age naturally over time where hands contact the edge. Overall length is 6-1/4 inches, so the pull extends beyond the mounting holes to span a wider section of the door or drawer edge, which helps distribute load and handling forces. As part of the Handles and Pulls class from Schaub and Company, this edge pull is designed for decorative hardware applications where the grip mounts along the edge rather than the face, helping support modern, minimal cabinet layouts.
This Baker edge pull uses a 5 inch center-to-center layout, so hole locations are fixed by that spacing when laying out jigs or drill guides. The pull is secured using #8 x 5/8 inch flat head sheet metal screw threads, so fasteners seat flush in countersunk holes and bite into the cabinet material for a tight connection. Overall length of 6-1/4 inches means the pull covers more of the edge profile, which supports stable handling when opening taller doors or wider drawers that place more leverage on the fastened area.
This Schaub Baker edge pull is part of a decorative hardware and moldings category, placing it in cabinet and furniture projects where appearance and function work together at the edge of a panel. With a 5 inch center-to-center dimension, it fits layouts designed around that drilling pattern, allowing uniform spacing when you repeat the pull across upper cabinets, base cabinets, or furniture pieces. The 6-1/4 inch overall length bridges a noticeable section of the door or drawer edge, so it suits applications where fingers catch the edge rather than a face-mounted knob. Because the pull is unlacquered brass, it suits jobs where the hardware is expected to develop patina as people use the cabinet, aligning with traditional, bespoke, or evolving-finish design briefs on long-term installations.
The defined 5 inch center-to-center drilling distance on this Baker edge pull gives a precise reference for templates, so repeated installations on a run of doors can stay level and evenly spaced. The #8 x 5/8 inch flat head sheet metal screw interface means the screw head sits down in the pull body, so the hand contacts a smoother surface when gripping from the edge. Using sheet metal screw threads ties the pull directly into the substrate thickness, which supports a firm hold when users pull on heavier drawer boxes or solid doors. The 6-1/4 inch overall length gives more leverage area, so users can grab anywhere along that span, which reduces concentrated stress at one point on the cabinet. Unlacquered brass material continues to react at the surface during use, so high-touch areas on the pull develop visual depth where hands operate doors and drawers most often.
The Schaub Baker edge pull has a 5 inch center-to-center distance, which sets the exact drilling layout for mounting across doors or drawers.
The Baker edge pull has a 6-1/4 inch overall length, so it covers more of the cabinet edge and offers a longer gripping area for the hand.
The edge pull is unlacquered brass, so the brass surface is exposed and can age and change appearance in response to handling and environment.
The Schaub Baker edge pull is designed for #8 x 5/8 inch flat head sheet metal screw threads, which seat into the pull and bite into the cabinet material.
The edge pull design mounts along the edge, keeping the door or drawer face visually cleaner while still providing a defined pulling point at the perimeter.
This Baker edge pull, part number 10022-UNBR, is produced by Schaub and Company within their decorative handles and pulls range.
The Schaub Baker edge pull, 5 inch center-to-center in unlacquered brass, offers an edge-mounted grip that works with a clean cabinet face and a living brass surface. With a 6-1/4 inch overall length and #8 x 5/8 inch flat head sheet metal screw interface, it supports confident handling across doors and drawers. For projects calling for decorative hardware from Schaub and Company in a Handles and Pulls class, this Baker edge pull delivers a defined drilling pattern and exposed brass metal that can align with long-term cabinet designs.