Schaub Cafe Modern Oval Slot Pull is a decorative cabinet pull that gives doors and drawers a defined grip point for everyday use. The 3-1/2 inch center-to-center dimension sets the mounting hole spacing, which helps align multiple pulls in a run for a consistent layout on cabinets or furniture. The modern oval slot design shapes a comfortable fingers-in pull area, so users can open fronts with a direct, positive hold. Matte white finish establishes a clean, neutral color tone that coordinates with many painted cabinet surfaces in kitchens, baths, or shop-built casework. The pull belongs to the Handles and Pulls, Schaub product class, so it works as a matching element with other decorative hardware from the same brand in a project.
The 3-1/2 inch center-to-center dimension gives installers a fixed measurement for drilling mounting holes, which supports straight alignment across doors and drawer fronts. The specified #8-32 thread size identifies the machine screw standard used with this pull, so it fits typical cabinet hardware drilling patterns that are tapped or drilled for that thread. The pull is designed as a handle within the Decorative Hardware & Moldings category, which means it mounts through the face of doors or drawers and is visible as part of the finished cabinet layout.
This Schaub Cafe Modern Oval Slot Pull, identified by manufacturer part number 10032-MW, fits projects that call for a modern cabinet pull with 3-1/2 inch center-to-center hole spacing. That dimension works on many base and wall cabinet doors, drawer fronts, and furniture pieces that are laid out for that standard spacing. Matte white finish supports use on painted cabinet runs where a uniform color across fronts and pulls is preferred, such as kitchen casework, bath vanities, or shop-built storage units. The pull sits within the Decorative Hardware & Moldings handles and pulls category, so it is intended for locations where the hardware remains visible and contributes to the overall appearance of the installation.
The modern oval slot form shapes the grip area as an opening, which lets users place fingers inside the pull rather than relying on a small edge. This geometry can assist on heavier drawers or full-height doors by giving a secure place to pull from. Being part of the Handles and Pulls, Schaub product class, this pull can be used alongside other Schaub and Company hardware that shares similar design language, which helps projects maintain a consistent look across multiple cabinet zones. The combination of a defined 3-1/2 inch center-to-center measurement and #8-32 thread connection supports straightforward planning when laying out hardware on new casework or during an update of existing fronts that already use the same spacing.
The clearly stated 3-1/2 inch center-to-center spacing on this pull gives installers a single critical measurement to work from when creating drilling jigs or templates. That fixed spacing helps keep long runs of doors and drawers visually straight, which is important on kitchen and commercial casework where hardware alignment is immediately visible. The #8-32 thread specification standardizes the screw interface, allowing the pull to be secured in a way that matches common cabinet construction practices where machine-threaded pulls are used through the door or drawer front.
The matte white finish on the Schaub Cafe Modern Oval Slot Pull establishes a consistent tone from pull to pull, which supports a uniform appearance when multiple pieces are installed on a project. As part of the Decorative Hardware & Moldings handles and pulls category at Wurth Baer Supply, the pull functions as both a working handle and a design element on cabinets and furniture. The modern oval slot design defines the visual style and gripping method, which can coordinate with other Schaub and Company components carrying similar modern lines and finishes.
The Schaub Cafe Modern Oval Slot Pull has a 3-1/2 inch center-to-center size, which sets the hole spacing for drilling and alignment on cabinet doors and drawers.
The Schaub 10032-MW pull has a matte white finish, which supports use on painted or light-colored cabinet faces where a low-sheen look is desired.
The pull is specified with a #8-32 screw thread size, which matches common machine screw standards used for mounting decorative cabinet pulls.
The pull is described as a modern oval slot design, which creates an open grip area and a contemporary look on cabinet doors and drawer fronts.
The cabinet pull is manufactured by Schaub and Company, placing it within the Handles and Pulls, Schaub product class for decorative hardware.
The 3-1/2 inch center-to-center pull suits cabinet and furniture projects set up for that hole spacing, such as kitchen cabinets, vanities, and storage casework.
The Schaub Cafe Modern Oval Slot Pull, 3-1/2 inch center-to-center, gives projects a defined modern grip with a matte white finish that coordinates with painted casework. With its #8-32 screw thread and standard handles and pulls category placement at Wurth Baer Supply, this pull aligns with common cabinet construction practices. Choose this Schaub and Company cabinet pull when a 3-1/2 inch center-to-center layout and a modern oval slot design match the hardware plan for your next cabinet or furniture build.