Schaub Modo Pull 4"CC describes a decorative cabinet pull with a 4 inch center-to-center dimension, so the mounting holes are drilled on a 4 inch layout that matches this pull. This matters when laying out new cabinet fronts or matching an existing pattern, because the 4 inch spacing dictates your boring jig setup and hole locations. The Signature Satin Brass finish identifies a brass-toned pull with a satin sheen, giving a muted metallic look rather than a mirror surface, which helps cabinets read clean and refined in both residential and commercial millwork. The product name ties directly to manufacturer part number 1201-SSB, so installers can reorder or match hardware consistently across multiple rooms or phases on a project. As part of the Handles and Pulls category from Schaub and Company, this pull serves as a primary touchpoint on doors and drawers, affecting daily use and client perception.
The 4 inch center-to-center measurement sets the boring distance between the two mounting points, so drill patterns and templates can be set to 4 inches for repeatable results across multiple fronts. The web description states a thread or screw size of 2xM4x45, which indicates two M4 threaded attachment points sized for 45 millimeter length screws, helping installers match the correct metric machine screw length when fastening through typical cabinet door and drawer thicknesses. Because the pull is identified as a "Pull, Signature Satin Brass, 4" Center-to-Center" in the description, the functional and aesthetic details are tied together in one spec line, supporting clean documentation on drawings, cut lists, and hardware schedules.
The SAP description "MODO PULL,4'CC,SIGNATURE SATIN BRASS" confirms that this pull is intended for applications needing a 4 inch center-to-center handle, so it suits cabinet doors and drawers drilled on that spacing. In the Decorative Hardware & Moldings category, it sits within Handles and Pulls, signaling that its primary use is as a handhold rather than as a knob or passive trim, which guides its placement on active fronts. The Signature Satin Brass finish defines a warm brass tone with a satin surface, making it suitable for millwork where a softer reflectance is preferred, such as kitchens, vanities, and built-in storage. Because the product is described as a pull in Signature Satin Brass, designers can specify this finish across multiple elevations to maintain a coherent hardware story, while installers can identify it quickly among other hardware on the job.
The stated 4 inch center-to-center spacing is a practical dimension that lines up with common cabinet drilling patterns, so once a jig is set to 4 inches, installers can run repetitive drilling across banks of doors and drawers without constant adjustment. This spacing fact also simplifies retrofit work whenever existing fronts are already bored at 4 inches, because replacing hardware with another 4 inch pull avoids re-boring or patching holes. The note "Thread / Screw Size: 2xM4x45" means the pull is built around two M4 threaded posts suited to 45 millimeter length screws, giving a defined metric interface that fits standard through-bored cabinet construction, which helps installers quickly match or source compatible machine screws by metric thread and length. Tying these dimensions to the fixed part number 1201-SSB lets shops standardize this pull in their hardware library, streamlining purchasing, inventory, and repeated installations on future projects.
The Schaub Modo Pull 4"CC uses a 4 inch center-to-center spacing, which sets the distance between its mounting holes and guides drilling layouts for cabinet doors and drawers.
The Signature Satin Brass finish gives the pull a brass tone with a satin sheen, creating a muted metallic look that supports a refined, coordinated style on cabinets and built-ins.
The Schaub Modo Pull 1201-SSB uses a thread or screw size listed as 2xM4x45, indicating two M4 threaded connections sized around a 45 millimeter screw length.
The manufacturer part number 1201-SSB uniquely identifies this pull, which helps designers and installers reorder, match, or schedule the same hardware across multiple areas.
The 4 inch center-to-center spacing lets installers set drilling jigs once for that dimension, then repeat the same setting across many fronts for consistent alignment.
This product is listed in the Decorative Hardware & Moldings category as a Handle and Pull, indicating it is designed to function as an active cabinet pull.
The Schaub Modo Pull 4"CC in Signature Satin Brass brings a defined 4 inch center-to-center layout, a satin brass finish, and an M4 threaded connection described as 2xM4x45, so it fits neatly into cabinet drilling patterns and finish schemes. With part number 1201-SSB clearly tying these details together, this pull can be specified once and used repeatedly wherever a 4 inch center spacing and satin brass look are required. For cabinet shops, millworkers, and serious DIY projects, this combination of fixed spacing, defined thread size, and recognizable finish helps standardize hardware choices across doors, drawers, and built-ins.