Schaub Modo recessed pull is a 3-7/8 inch by 3-7/8 inch square pull that sits recessed into the surface, so doors or drawers gain a low-profile grip that stays flush where a protruding pull could catch or interfere with nearby fronts. The pull is identified by Schaub and Company as part number 1207-GM, giving installers a clear reference point when matching to project schedules or repeating a successful hardware choice on future work. Its recessed format defines a contact area for the hand without adding extra projection, which supports clean cabinet lines and close reveals in tight layouts. The square footprint provides a defined geometry that lines up visually with square or slab fronts, supporting consistent layout when repeating the pull across a run of cabinets.
This recessed pull uses a thread and screw size specified as 2x M4x12, which means the mounting interface is designed around two metric M4 machine screws at 12 millimeter length that draw the pull tight into its recess. That thread specification allows installers who work regularly with metric cabinet hardware to plan drilling and boring operations around standard M4 through-holes, helping maintain consistency with other Schaub and Company pieces that use the same thread style. The 3-7/8 inch square shape defines the cutout or mortise area needed to receive the pull body, so the visible footprint can be coordinated with panel layout and edging. With the pull recessed rather than surface-mounted, the front face remains visually flat while still providing a defined grip point within the square opening.
The Modo recessed pull, described as a recessed pull with a 3-7/8 inch square size, lends itself to cabinet fronts where a low-profile grip is preferred over a traditional projecting handle, because the pull nests within the panel rather than sitting on top. The square format translates easily to layouts based on consistent horizontal and vertical lines, allowing installers to line the pull up with door and drawer edges so the recesses create a repeated visual rhythm across a bank of cabinets. Because the pull belongs to the Handles and Pulls category within decorative hardware and moldings, it fits into jobs where the design intent is for a functional grip that also contributes to the finished look of the cabinetry. The recessed configuration can support installations near adjacent components, as the hardware does not extend outward beyond the cabinet surface, helping maintain clearance where a protruding pull might otherwise interfere with nearby doors, panels, or walkways.
The gun metal description in the web listing defines the visual tone of this pull, so the finish can be coordinated with other visible hardware elements in the same space when a darker metal accent is part of the design plan. The specified 3-7/8 inch by 3-7/8 inch overall dimension gives installers a fixed reference for making jigs or templates, allowing the same recess size and placement to be repeated across multiple fronts with predictable results. The thread specification of 2x M4x12 indicates that two metric M4 screws are used in mounting, which aligns with common cabinet hardware practice and supports using standard drilling equipment set for metric machine screw clearances. With the Schaub Modo recessed pull clearly identified by manufacturer part number 1207-GM and cataloged under Handles and Pulls, ordering and reordering for large runs or later additions can track back to that single identifier, reducing the chance of mixing hardware types on a project.
The Schaub Modo recessed pull has an overall size of 3-7/8 inches by 3-7/8 inches, giving it a square footprint that simplifies centering and alignment on cabinet doors and drawers.
The recessed pull is described as gun metal, providing a darker metallic appearance that can coordinate with other gun metal decorative hardware in the same project.
The recessed pull uses a 2x M4x12 thread and screw size, so mounting is based on two M4 metric machine screw connections at 12 millimeter length through the cabinet front.
The 3-7/8 inch square size defines a consistent visual block, helping installers align multiple pulls in straight rows and columns across doors and drawer fronts.
The manufacturer part number is 1207-GM, which ties directly to Schaub and Company documentation and simplifies specifying the same pull on future projects.
This product is listed under Handles and Pulls in decorative hardware and moldings, placing it among operating hardware used on cabinet doors and drawers.
The Schaub Modo recessed pull in gun metal pairs a 3-7/8 inch by 3-7/8 inch square footprint with a recessed design, giving cabinets a flat front look while still providing a defined grip point for daily use. Its 2x M4x12 screw and thread specification aligns with standard metric cabinet hardware practice, so installers working with similar pulls can integrate it into familiar drilling and fastening routines. Identified by Schaub and Company part number 1207-GM and categorized as a handle and pull, this piece fits cleanly into decorative hardware schedules. For projects calling for square recessed pulls in a gun metal tone, this model offers a clearly defined size, finish description, and mounting thread to support consistent cabinet layouts.