Schaub Modo recessed pull is a square recessed pull that creates a low-profile grip point in woodwork and casework. The pull has an overall size of 3-7/8 x 3-7/8 inches, so layouts can be planned around a consistent square cutout. The square format helps align with modern cabinet and door designs, giving straight sightlines that match contemporary projects. The pull is finished in Signature Satin Brass, providing a brass look with a satin sheen that suits decorative hardware work. This finish ties into other Signature Satin Brass pieces on the same job, helping keep hardware finishes consistent across a run of cabinets or doors. The pull is threaded for 2xM4x12 screws, so installers can work with a metric M4 connection when fastening from the rear face of a panel. The recessed design keeps hardware flush, which matters where projections must stay minimal.
This recessed pull has a 3-7/8 by 3-7/8 inch overall dimension, giving tradespeople a clear outside measurement for routing or machining a square recess. Because the pull is recessed, it is intended to be set into the face of a door, drawer, or panel so that the front surface stays relatively flush. The square geometry simplifies layout when aligning multiple pulls along cabinet banks or wall panels, as equal dimensions in both directions keep spacing straightforward. With threads specified as 2xM4x12, the pull works with M4 machine screws in two connection points, which supports a stable, two-point mount into the rear of the workpiece. This thread type also suits workshops already using M4 hardware in other decorative fittings, allowing one screw style to serve multiple components where that system is in place.
The recessed pull, identified as 3-7/8 inch square, is well suited to installations where a square visual detail is preferred across cabinets or built-ins. Its recessed format supports doors and drawers that need a grip without a projecting handle, such as flat-front cabinetry or flush wall panels. The 3-7/8 x 3-7/8 inch overall size works as a visual anchor on medium-scale fronts, where a clearly defined square pull becomes part of the design pattern. In decorative hardware and moldings work, this pull fits into the handles and pulls class, so it can be specified alongside other Schaub and Company pulls for coordinated projects. Because the pull uses a recessed pocket for actuation, it can support applications where clothing or materials should not snag on protruding hardware, while still giving a defined point to pull a door or drawer open.
The stated 3-7/8 inch by 3-7/8 inch overall dimension helps shops standardize jigs and templates, so every recess for this pull shares the same outside limits. That kind of fixed sizing is useful when running multiple fronts through CNC or router setups, keeping hardware locations consistent from piece to piece. The pull is described as a Recessed Pull, which signals that it occupies material depth rather than sitting fully on the surface, guiding fabricators to plan for a pocketed cavity. Signature Satin Brass as the finish lets designers tie this part into other Signature Satin Brass hardware, maintaining material and color continuity throughout the project. The 2xM4x12 thread detail defines the fastening interface, helping installers select M4 screw tooling and drilling patterns that match the threaded bosses in the pull. Being part of Schaub decorative handles and pulls means it belongs to a recognized decorative hardware line, which supports specification on detailed millwork schedules where brand and series matter.
The recessed pull has an overall size of 3-7/8 x 3-7/8 inches, which sets the square footprint for routing or machining the recess in cabinet doors, drawers, or panels.
The pull uses a Signature Satin Brass finish, allowing it to coordinate with other satin brass decorative hardware and support a consistent visual theme across a project.
The recessed pull is threaded for 2xM4x12, so it mounts using two M4 screw connections from the rear, giving a secure, two-point attachment into the workpiece.
This recessed pull suits cabinet doors, drawers, or panels where a low-profile, pocketed grip is desired instead of a projecting handle, helping maintain a flatter front surface.
The 3-7/8 inch square shape keeps both height and width equal, which simplifies alignment and spacing when repeating pulls across multiple matching cabinet fronts.
This pull is identified as a Schaub Modo recessed pull in the handles and pulls class from Schaub and Company, fitting into their decorative hardware offering.
The Schaub Modo recessed pull in Signature Satin Brass provides a 3-7/8 x 3-7/8 inch square recessed grip suited to decorative cabinet and panel work. With its defined overall size and 2xM4x12 threaded mounting, it supports predictable machining and fastening on professional jobs. The combination of recessed construction and satin brass finish lets designers and installers align visual intent with functional, low-profile hardware. For projects calling for a square recessed pull in Signature Satin Brass, this Schaub and Company 1207-SSB model offers a clearly specified option for repeatable cabinet and millwork installations.