Schaub Martello pull 5-1/16 CC describes a decorative cabinet handle from Schaub and Company that is designed for projects needing a 5-1/16 inch center-to-center mounting layout, so installers can match existing drilling patterns on doors or drawers. The pull uses a 128 mm center-to-center dimension, which supports metric-based layouts on cabinetry and casework. Its rounded ends are shaped to present a smooth profile, which helps create a comfortable hand grip along the full length. The Natural Britannium material in the 174-N part number defines the pull body, giving a consistent base metal for a unified appearance across multiple cabinets. Being part of the Handles and Pulls, Schaub class within Decorative Hardware and Moldings ties this pull directly to typical cabinet, furniture, and millwork hardware needs.
The 5-1/16 inch center-to-center layout on the Schaub Martello pull provides a fixed distance between mounting points, so drilling or existing holes can follow that measurement for consistent alignment across multiple fronts. The 128 mm center-to-center figure expresses the same spacing for shops that dimension hardware locations in metric, reducing conversion steps when laying out rows of handles. The M4 thread / screw size detail defines the internal thread at each mounting point, allowing cabinet builders to select M4-threaded fasteners that match their preferred installation method. Together, the stated spacing and thread size support a predictable fit when this pull is integrated into cabinet, furniture, or millwork projects.
The category Decorative Hardware and Moldings | Handles and Pulls places the Schaub Martello pull squarely in cabinet, furniture, and woodworking installations, so it suits projects where a handle is needed for doors or drawers. The 5-1/16 inch center-to-center spacing corresponds to a common handle size in cabinetry, which aligns with layouts on many kitchen, bath, or built-in units that are drilled for this measurement. At the same time, the 128 mm center-to-center value lets shops following metric standards position this pull accurately on panels or drawer fronts. The rounded ends of the pull give each side a finished, curved termination, which can complement softer cabinet profiles while providing a consistent hand contact area across multiple units.
The Natural Britannium material specified for the Martello pull defines the base metal used in the 174-N version, so each handle in a run shares the same material for visual continuity. This consistency helps installers deliver banks of cabinetry where every handle presents the same natural metal tone. The M4 thread / screw size detail sets a clear mounting standard, which supports repeatable installation workflows whenever M4-threaded fasteners are used in the shop or on site. The Manufacturer Part # 174-N ties the pull to a specific configuration in the Schaub and Company line, helping shops reorder the exact same handle for future phases or service work. Together, these defined attributes support predictable alignment, appearance, and fastening when the pull is used across multiple projects.
The Schaub Martello pull uses a 5-1/16 inch center-to-center spacing, which sets the distance between mounting holes for aligning with drilled cabinet or drawer fronts.
The 128 mm center-to-center dimension lets installers and shops using metric plans position the pull accurately, matching metric-based drilling jigs and cabinet drawings.
The Schaub Martello pull 174-N is described as Natural Britannium, giving the handle a consistent metal base that keeps the appearance uniform across multiple installed pulls.
The Martello pull is specified with an M4 thread / screw size, so M4-threaded fasteners engage properly with the handle during cabinet or drawer installation.
The rounded ends create a softened profile at each side of the pull, which provides a smoother hand contact area when opening and closing doors or drawers.
This pull is identified by Manufacturer Part # 174-N and the Schaub Martello name, linking it to a specific configuration within the Handles and Pulls, Schaub product class.
The Schaub Martello pull, 5-1/16 inch center-to-center, Natural Britannium, offers a defined 128 mm mounting layout, rounded ends, and M4-threaded attachment points, giving cabinet and woodworking professionals a clearly specified handle choice for doors and drawers. Selecting this pull by its 174-N part number and center-to-center dimensions allows straightforward integration into new casework or replacements where that spacing is already drilled. For jobs requiring decorative handles and pulls that align with established imperial or metric layouts, this Martello pull provides the stated measurements and material needed to coordinate hardware across a run of cabinets.