Schaub Northport pull defines this cabinet handle as a Schaub and Company design from their decorative handles and pulls class, giving projects a consistent look when matching other Schaub hardware across a job. The pull uses round bases, so each end sits on a circular footprint that helps visually transition between the fastener points and the cabinet surface for a finished appearance. The pull is identified as a handle and pull in the decorative hardware and moldings category, positioning it for cabinet doors, drawers, and similar furniture applications where a graspable pull is required. The manufacturer part number 203-26 ties this polished chrome version to Schaub documentation and job schedules, which helps when reordering for multi-room builds. The product is described in polished chrome, giving the metal a bright, reflective surface that suits modern kitchens, baths, and casework where a clean, metal finish is desired.
The pull description lists a 10 inch center-to-center dimension, meaning the distance between the two mounting holes is 10 inches, which guides drilling templates and layout when setting up cabinet door or drawer fronts. This fixed spacing lets installers repeat the same measurement run-to-run across a kitchen or bank of casework when using this specific handle. The thread or screw size is given as #8-32, so each mounting point is tapped for that thread, which determines which machine screw threads will seat properly in the pull body. Knowing the #8-32 thread specification helps coordinate the pull with standard cabinet fasteners selected to match door or drawer thickness. The use of round bases on the pull means the bearing area at each end is circular, which can help visually square the handle to edges by sighting the round bases relative to door stiles or drawer borders.
This product is categorized as decorative hardware and moldings in the handles and pulls group, aligning it with cabinet doors, drawers, and furniture fronts where a metal pull is required for everyday operation. Being part of the Schaub and Company product family, it suits projects where the hardware schedule calls for Schaub brand handles for consistency across multiple openings. The polished chrome finish makes the pull suitable for installations where bright metal hardware coordinates with other polished chrome items such as hinges, faucets, or shower fittings. With a 10 inch center-to-center layout, the pull works on wider cabinet doors and drawers where a longer handle visually balances the front and offers a broad gripping span along the face. The round bases at each end give the pull a defined footprint on wood, laminate, or other cabinet surfaces, which contributes to a finished, decorative appearance on completed casework.
The specified 10 inch center-to-center dimension serves as the key reference for jigs and drilling patterns, so installers can mark and bore consistently spaced holes that match this particular Schaub Northport pull across an entire run. Using this fixed spacing helps reduce layout variations from cabinet to cabinet, which supports straight hardware lines on large installations. The #8-32 thread size means each end of the pull accepts that standard machine screw thread, allowing installers to match fasteners to panel thickness while relying on a known thread interface at the handle. This defined thread and spacing combination simplifies replacement work too, because any future swap to the same Schaub 203-26 pull can reuse the existing 10 inch pattern and #8-32 interface if the cabinet fronts remain the same. The polished chrome finish on the pull presents a smooth metal surface that is easy to visually inspect when aligning multiple handles, since reflections along the pull can highlight if pieces sit level relative to each other.
The Schaub 203-26 Northport pull is a decorative handle in the handles and pulls category, used as a cabinet or furniture pull where a metal gripping point is needed.
The 10 inch center-to-center dimension indicates the distance between the pull's two mounting holes, guiding drilling layouts so holes align with the threaded points on the handle.
The polished chrome finish gives the pull a bright, reflective metal look, helping it coordinate with other polished chrome hardware and fixtures in kitchens, baths, or furniture.
This cabinet pull uses a thread or screw size of #8-32, so each mounting point is tapped for #8-32 machine screws for fastening to cabinet doors or drawers.
The round bases create circular footprints at each end of the pull, helping visually reference and align the handle relative to door edges or drawer borders during layout.
The Northport pull with round bases is manufactured by Schaub and Company, tying it to their decorative hardware and pulls line for coordinated cabinet projects.
The Schaub Northport pull with round bases, in polished chrome, combines a 10 inch center-to-center layout with #8-32 threaded mounting points, giving installers defined drilling and fastening details for cabinet doors and drawers. Its placement within the decorative hardware and moldings, handles and pulls category positions it squarely for cabinetry and furniture projects that call for a metal pull. Choosing the Schaub 203-26 part number allows hardware schedules to specify this exact finish, size, and thread interface. For the next run of cabinets or casework where a polished chrome handle with a 10 inch center-to-center pattern is needed, this Northport pull offers a consistent, brand-specific solution.