Schaub Northport pull gives you a defined grip point with square bases at each end, so the handle reads clean and modern while keeping a solid bearing surface on the cabinet face. As a decorative handle in the Handles and Pulls category, it functions as the working touchpoint on doors or drawers, carrying daily opening and closing loads. The satin nickel finish keeps the visual look muted rather than shiny, which helps this pull work in both residential and commercial millwork where a softer metal tone is preferred. Schaub and Company branding signals this pull belongs to a coordinated decorative hardware line, which matters when multiple openings on a job need a consistent style reference. The 6 inch center-to-center dimension defines exactly how far apart the mounting holes are, so it ties directly to layout, drilling, and template placement across a full run of fronts.
The 6 inch center-to-center dimension on this Schaub Northport pull sets the hole spacing that cabinet faces or drawer fronts need, which supports straightforward layout using common drilling jigs or simple centerline measurements. Square bases at the ends give clear visual edges that help align the pull parallel to door or drawer edges during install, reducing the chance of a subtle twist across multiple fronts. The #8-32 thread detail means the internal holes are sized to accept machine screws with that thread pattern, which matters when a shop standardizes its hardware fasteners across cabinets. As a pull in the Decorative Hardware and Moldings category, it is meant for through-bored mounting from the back of the workpiece into the threaded body of the handle.
This Schaub Northport pull with square bases is part of the Handles and Pulls, Schaub product class, which positions it for use on cabinet doors, drawer fronts, and similar casework that needs a grasp point. The satin nickel finish suits decorative hardware applications where a consistent metal tone across pulls, knobs, and other parts is important to the finished look. Square bases bookend the grip area, so when mounted on doors or drawers they provide crisp start and stop lines that can be visually lined up with panel rails, stiles, or reveal lines. Being a decorative handle in the broader Decorative Hardware and Moldings category ties it into woodworking and cabinet projects rather than general construction, helping it fit millwork shops that standardize on a specific style family.
The 6 inch center-to-center measurement on this Schaub Northport pull gives installers a repeatable dimension for drilling jigs, which supports consistent handle placement across large kitchen, bath, or commercial cabinet runs. Square bases give an easy reference against door or drawer edges, allowing the pull to be squared visually while tightening, which helps reduce rework caused by misaligned hardware lines. The satin nickel finish maintains a uniform appearance across all pulls ordered with this finish designation, which matters when multiple casework sections share sightlines in the same room. The #8-32 screw thread lets shops rely on a common thread standard for mounting this pull, simplifying hardware bin management and helping match existing cabinet drilling setups that already use #8-32 machine screws. The clear identity as Schaub Northport pull with square bases, 6 inch CC, satin nickel ties all of these details together into one repeatable choice that can be specified by part number across drawings and purchase lists.
The Schaub Northport pull has a 6 inch center-to-center dimension, which sets the distance between mounting holes and drives drilling layout on cabinet doors and drawer fronts.
The satin nickel finish on this pull creates a muted, less reflective metal surface, which helps it blend with many hinge and appliance finishes in cabinet installations.
The Schaub Northport pull is specified with #8-32 thread size, which defines the machine screw type that engages the pull during mounting from the back of the cabinet front.
This Schaub Northport pull is in the Handles and Pulls, Schaub product class and Decorative Hardware and Moldings category, aligning it with cabinet doors, drawer fronts, and similar woodworking projects.
The square bases provide flat, defined contact areas at each end of the pull, helping it sit square on the surface and align visually with cabinet edges and reveals.
The pull is identified as Schaub Northport pull with square bases, satin nickel, 6 inch center-to-center, with manufacturer part number 207-15 for specification and ordering.
The Schaub Northport pull with square bases, 6 inch center-to-center, satin nickel gives cabinet and millwork projects a defined handle layout supported by a known screw thread and a consistent finish. The 6 inch center-to-center spacing and #8-32 thread specification tie directly into drilling, fastener selection, and repeat work across runs of doors or drawers. Selecting this Schaub and Company cabinet pull lets drawings, cutlists, and hardware orders use a single clearly defined part reference that matches decorative hardware needs on professional or serious DIY installations.