Schaub Northport pull defines this handle as a specific Schaub and Company design, which gives installers a consistent style reference when matching existing decorative hardware or planning a full hardware layout across a project. The Northport pull with square bases detail identifies that each end of the pull terminates in a square base, which creates a clean transition to the cabinet surface and helps set a clear visual footprint for layout across doors and drawers. The 10 inch center-to-center measurement ties directly to the hole spacing between the threaded mounting points, which matters when drilling new fronts or reusing existing 10 inch on-center holes during replacements. The Signature Satin Brass finish identifies a satin brass color tone, which lets you coordinate the pull with other Signature Satin Brass cabinet hardware from the same space. The Decorative Hardware & Moldings category placement confirms its intended use on cabinetry and related millwork.
The 10 inch center-to-center hole spacing provides a precise layout reference, which allows installers to position drilling templates or jigs confidently for repetitive cabinet door and drawer work. The square bases at the ends of the pull define a consistent footprint against the cabinet surface, which supports straight visual alignment relative to door stiles, rails, or drawer edges. The specified thread and screw size of #8-32 describes the pull's internal threads, which lets you match it to #8-32 machine screws sized for the thickness of your cabinet doors or drawer fronts. The Signature Satin Brass designation ties this pull to that specific finish family, which is useful when aligning finish details across knobs, pulls, and other decorative hardware in the same room.
The Decorative Hardware & Moldings classification establishes this Schaub and Company Northport pull as cabinet-ready hardware, which makes it suitable for cabinetry, furniture-grade storage, and similar millwork where decorative handles and pulls are specified. The Handles and Pulls, Schaub product class further anchors it within Schaub's handle lineup, which is helpful when a project calls for continuity with other Schaub decorative hardware. The 10 inch center-to-center dimension points toward wider cabinet doors, larger drawers, or appliance-style fronts that benefit from a longer grasp, which can support balanced proportions on larger faces. The Signature Satin Brass finish identifies a satin brass aesthetic, which allows the pull to act as a visible design element on painted, stained, or laminate cabinet surfaces that coordinate with that tone.
The clearly stated 10 inch center-to-center spacing gives installers a fixed measurement to program into boring jigs or layout templates, which helps produce repetitive, accurate hole placement across multiple cabinet fronts with minimal rework. The square bases on the pull's ends create orthogonal reference edges against the cabinet surface, which can be aligned visually with door or drawer geometry to keep pulls straight and consistent from one front to the next. The thread and screw size of #8-32 defines the machine thread standard for this pull, which simplifies selecting correctly threaded fasteners and supports a secure mechanical connection through typical cabinet door and drawer thicknesses. The manufacturer part number 208-SSB ties this exact combination of Northport profile, square bases, 10 inch center-to-center size, and Signature Satin Brass finish to a single identifier, which helps designers, purchasers, and installers all reference the same specific pull during ordering and field installation.
The Schaub Northport pull is a decorative cabinet handle classified under Decorative Hardware & Moldings and Handles and Pulls, Schaub, so it functions as a pull for cabinetry and related millwork.
The 10 inch center-to-center dimension indicates the distance between the pull's mounting holes, which guides drilling and allows direct replacement on fronts with existing 10 inch on-center holes.
The square bases provide defined edges at each end of the pull, which help align the hardware visually with cabinet door or drawer geometry for consistent positioning across multiple fronts.
The 208-SSB Northport pull uses the Signature Satin Brass finish, which establishes a satin brass appearance that can be matched with other Signature Satin Brass hardware on the project.
This cabinet pull uses a #8-32 thread and screw size, which means it mates with #8-32 machine screws for fastening through typical cabinet doors and drawer fronts.
The Schaub part number 208-SSB identifies the Northport pull with square bases in a 10 inch center-to-center size and Signature Satin Brass finish, helping specify the exact handle style and finish.
The Schaub Northport pull with square bases, 10 inch center-to-center dimension, and Signature Satin Brass finish offers a defined combination of style, size, and finish that suits cabinetry and decorative millwork. The precise 10 inch center-to-center spacing, #8-32 thread specification, and square base design provide clear layout and mounting details, which supports efficient installation across doors and drawers. For projects that call for Schaub and Company decorative handles and pulls in a Signature Satin Brass look, this Northport pull gives you a consistent, brand-specific hardware option to carry through your next cabinet or furniture-grade build.