Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Schaub Urbano pull is a contemporary rectangular pull designed for wide drawer fronts, tall pantry doors, and other oversized cabinet applications where a standard-length pull would look undersized on the face.
At 18 inches between mounting holes, this pull is built for the fronts that defeat a shorter pull visually: a full-height pantry door, an island drawer bank that runs wider than two feet, a refrigerator panel, or a bank of inset drawers where the hardware is meant to read as a continuous horizontal element across the face. A shorter pull centered on a front this wide leaves too much blank door on either side. The 18-inch spacing gives the hardware something to anchor to, and on a tall slab door it draws the eye horizontally and holds the proportion of the front rather than getting lost in the middle of it.
The pull is constructed from zinc and finished in Signature Satin Brass, Schaub's own name for this finish within the Urbano line. The satin surface takes the glare off the brass tone without dulling it to a flat matte, which means it reads as warm metal in kitchen light rather than as a painted surface. Against white, off-white, or warm-toned cabinet fronts the finish adds depth. Against a darker wood or a painted charcoal front, it holds its gold tone as a deliberate contrast. Because this is a catalog-specific finish name, it is not interchangeable with other manufacturers' satin brass offerings, and it should be matched to other Urbano pieces rather than assumed to coordinate with hardware from a different line.
Cabinet shops and designers building contemporary kitchens reach for this pull when the floor plan calls for a strong horizontal hardware line across wide drawers or when a single pantry tower needs hardware proportioned to its height. It suits projects running a mixed hardware program: knobs or shorter pulls on upper doors, with the 18-inch pull handling the large drawer banks and pantry fronts below. Homeowners replacing existing hardware on an oversized front will want to confirm their existing hole spacing before ordering, since 18 inches is a less common drilling pattern than the standard 3-3/4-inch or 5-1/16-inch spacings found on typical base cabinets.
It is not as common as the 3-3/4-inch or 5-1/16-inch spacings used on typical base drawers. It is most often specified new rather than used as a replacement for an existing drilling. Measure your existing holes before ordering if you are replacing hardware.
Zinc. The Signature Satin Brass finish is the surface treatment applied over the zinc substrate.
Yes. The Urbano collection includes pulls in multiple center-to-center lengths in the same design language and finish, so you can match this to shorter pulls on narrower drawers within the same series.
Signature Satin Brass is Schaub's own finish name for the Urbano line. Brass-toned finishes vary between manufacturers, so coordinate within the Urbano collection rather than assuming a cross-brand match.
Choose this pull when the cabinetry calls for hardware that spans the width of an oversized front and holds its visual weight in a warm satin brass finish.