Schaub fused glass rectangular pull gives cabinets a fused glass handle with a defined rectangular profile, so doors and drawers gain a precise visual line that helps align a run of fronts. The 4-1/2 x 1 overall size establishes a noticeable hand grip area that supports confident operation on typical cabinet widths. A 3 inch center-to-center drilling pattern matches a common hardware layout, allowing straightforward layout of new fronts on shop jigs. The translucent white fused glass front face diffuses light, which softens reflections across the cabinet bank. A conical stem design transitions from the mounting surface to the pull body, setting a clear stand-off that helps fingers clear the door face. The gold finish reference in the part designation ties the pull into projects using warm-toned decorative hardware. The Schaub and Company brand identity situates this pull within the Schaub decorative hardware line.
The 3 inch center-to-center specification defines the exact hole spacing required, which lets installers position boring locations accurately before finishing the cabinet fronts. The 4-1/2 inch overall length means the pull extends beyond the hole spread, so there is visible grip at each end that helps users catch the pull from different angles. The 1 inch overall width sets how far the pull spans across the face, affecting how much of the door or drawer front remains visible around it. The conical stem structure leads from the mounting surface up to the fused glass body, establishing a predictable stand-off distance that supports clearance for fingertips on standard cabinet door thicknesses. The rectangular form concentrates the hand contact area along straight edges, which can feel familiar for users accustomed to linear cabinet hardware shapes.
This fused glass rectangular pull from Schaub and Company sits in the Decorative Hardware & Moldings category under handles and pulls, so it serves as a visible touch point on cabinet doors and drawers. The 4-1/2 x 1 overall sizing suits many residential or shop-built cabinet faces where a moderate-length pull is desired. Its 3 inch CC drilling aligns with widespread cabinet layouts, which is helpful when hardware is planned around standard boring equipment. The translucent white fused glass front contributes a light visual effect that can coordinate with similar tones in doors, drawer fronts, or surrounding surfaces. The conical stem and gold-related identifiers position the part for projects pairing glass faces with warm metallic tones, supporting designs that rely on mixed materials. The Schaub product class reference signals that this part belongs alongside other handles and pulls in the same family on a project board.
The specific manufacturer part number 211060-TW-GLD ties ordering directly to this fused glass rectangular pull configuration, which helps maintain consistency when repeating hardware across multiple cabinets or phases. The 4-1/2 x 1 overall measurement allows installers to predict the visual spacing between adjacent pulls, aiding in planning door and drawer widths so hardware does not visually crowd. The 3 inch CC figure allows use of the same drilling pattern wherever this pull is specified, supporting repeatable shop workflows. The rectangular fused glass front with translucent white color can be lined up parallel to door edges, creating visual alignment that is easy to read during installation. The conical stem structure suggests a defined transition from door surface to pull grip, giving a clear visual reference when checking orientation. Being listed under Schaub handles and pulls groups it logically within Schaub decorative hardware layouts used for project specification documents.
The Schaub fused glass rectangular pull measures 4-1/2 x 1 overall, which sets a moderate footprint on the door or drawer front for balanced proportions.
The pull uses a 3 inch center-to-center spacing, allowing straightforward layout with common cabinet hardware boring patterns and jigs.
The pull features translucent white fused glass, creating a light-toned face that softens light and coordinates with lighter or contrasting cabinet finishes.
The conical stem provides a tapered support between the cabinet surface and the fused glass body, giving defined stand-off and space for fingers behind the grip.
This pull is produced by Schaub and Company, placing it within the Schaub decorative hardware and handles product class.
The part number 211060-TW-GLD identifies this specific fused glass rectangular pull configuration, helping specify the same model across cabinets.
The Schaub fused glass rectangular pull with 4-1/2 x 1 overall sizing and 3 inch CC provides a defined layout point for new or remodeled cabinets. The translucent white fused glass face and gold-related designation support projects using mixed glass and warm-tone hardware. The conical stem structure and rectangular form create a predictable grip area that works across doors and drawers in the same run. When a project calls for a Schaub and Company fused glass cabinet pull with these dimensions and visual characteristics, this 211060-TW-GLD model is the targeted choice.