Schaub fused glass oval pull describes a cabinet pull built around a fused glass grip in an oval shape, so it works as a decorative and functional handle on cabinet doors or drawers. The 4-1/2 inch by 1 inch overall size creates a long, narrow handhold, which gives fingers room to grab without overpowering smaller cabinet fronts. A 3 inch center-to-center dimension sets the mounting hole spacing, so it aligns with cabinet layouts designed for this common spread. The translucent white glass grip diffuses light, which softens the visual impact on face frames and fronts while still reading as a glass detail. A conical stem supports the pull from the mounting surface, which visually transitions from the cabinet face to the glass grip. The gold stem finish contrasts with the translucent white grip, which helps the pull read clearly against both light and darker cabinet finishes.
The 3 inch center-to-center measurement on this Schaub and Company pull fixes the distance between mounting holes, so drilling can follow a consistent pattern across doors and drawers using the same layout. The 4-1/2 inch overall length defines how far the pull extends along the rail or stile, which lets installers position it to clear neighboring hardware lines or panel profiles. With an overall width of 1 inch, the pull occupies a controlled strip of space on the face, which helps maintain margin from door edges and adjacent fronts in tight runs. The conical stem design presents a focused contact point at the cabinet face, which helps visually anchor the fused glass grip while keeping the footprint on the surface compact.
This Schaub fused glass oval pull is identified as a handle and pull within decorative hardware and moldings, so it is intended for cabinet doors or drawers where a grip is needed and hardware is part of the visible design. The 4-1/2 inch by 1 inch overall profile suits face frames and slab fronts that benefit from a longer pull without moving into bar-handle proportions, which can help maintain scale on both base and wall cabinets. Its 3 inch center-to-center spacing aligns with one of the most common drilling dimensions in cabinetry, which helps when hardware layouts or templates are based on that spread across a project. The translucent white fused glass grip visually lightens the pull on painted or light-stained fronts, which can support designs targeting a softer, less industrial hardware look. The gold conical stem adds a defined metal accent point beneath the glass, which can coordinate with other gold-toned hinges, knobs, or decorative hardware in the same room.
The defined 3 inch center-to-center dimension on the 211062-TW-GLD cabinet pull gives installers a fixed reference for drilling, which supports consistent alignment when repeating the pull across multiple doors or drawers. Because the overall length is 4-1/2 inches, the pull establishes a predictable proportion relative to standard cabinet door rails, which helps maintain an even visual rhythm along a run of cabinetry. The 1 inch overall width keeps the grip contained within a narrow band, which aids in holding consistent edge distances and spacing in tight layouts or near adjacent walls. The combination of a translucent white glass grip and a gold conical stem is set by the part number, which simplifies matching additional pulls to an existing installation that uses the same model. As a product from Schaub and Company within the handles and pulls class, it occupies a defined role in decorative cabinet hardware selections, which lets it be planned alongside other pulls and knobs from the same brand family.
The Schaub fused glass oval pull has an overall size of 4-1/2 inches by 1 inch with 3 inches center-to-center, so mounting and visual coverage can be planned directly from those fixed measurements.
The 3 inch center-to-center spacing sets the drilling distance between mounting points, so it suits cabinet layouts or templates already designed around this common hole spread.
The translucent white fused glass grip diffuses light rather than reflecting it sharply, so it softens the appearance on cabinet faces while still reading as a glass detail.
The gold conical stem supports the fused glass grip from the cabinet surface, so it creates a defined metal accent and a clean transition between door face and glass pull.
This handle is categorized as a decorative handle and pull from Schaub and Company, so it functions as both working hardware and a visible design element on cabinetry.
The 211062-TW-GLD part number identifies this specific fused glass oval pull in translucent white with a gold stem, so matching or reordering the same model is straightforward.
The Schaub fused glass oval pull, in a 4-1/2 inch by 1 inch overall size with 3 inches center-to-center, offers defined dimensions that simplify cabinet drilling and layout. Its translucent white fused glass grip paired with a gold conical stem establishes a clear visual statement that aligns decorative intent with everyday handling. For projects using Schaub and Company handles and pulls, this 211062-TW-GLD model from Wurth Baer Supply can be specified wherever a fused glass cabinet pull is desired to coordinate across doors and drawers.