Schaub Classico pull identifies this piece as a decorative handle from Schaub and Company that functions as a cabinet or drawer pull, so it suits projects where appearance and grip both matter on finished woodworking. The product is described as a pull in matte black, which gives a consistent dark finish that blends with other black decorative hardware in a run of cabinets or a bank of drawers. The center-to-center dimension is 128 mm, so the two mounting holes are spaced for layouts drilled on that metric standard in shops or on site. The same size is described as 5-1/16 inch center-to-center, so installers working in imperial units can match existing hole patterns without conversion. The manufacturer part number 221-MB ties directly to Schaub and Companys catalog, which supports repeat ordering of the exact same pull across multiple jobs.
The stated 128 mm center-to-center dimension sets the exact distance between the two mounting points, which lets installers drill or route consistent holes for the pull across a full kitchen or office run. The parallel reference of 5-1/16 inch center-to-center connects that metric size to a common imperial layout, which helps when replacing existing pulls that were measured in inches. The thread or screw size noted as M4 defines the internal thread in the pull, so it matches standard M4 machine screws commonly stocked in woodworking shops. The matte black finish description also matters during installation, because it guides the selection of hinges, knobs, and other visible hardware that will visually align with this pull once everything is mounted.
The web description identifies this product as a pull in matte black, which aligns it with cabinet and furniture applications where a dark, low-sheen handle is preferred across doors and drawers. The classification under decorative hardware and moldings, handles and pulls, places this part at the finish carpentry stage, when visible hardware is fitted to casework, built-ins, or commercial millwork. The 128 mm center-to-center sizing positions this pull for use on cabinets drilled on common European-style layouts, so it can integrate with hardware runs that already follow that spacing. The same spacing indicated as 5-1/16 inch center-to-center allows the pull to be used on projects specified in imperial units, such as residential kitchens where existing drawings or previous hardware were dimensioned in inches.
The center-to-center measurement of 128 mm gives a repeatable reference for drilling jigs, which supports fast, consistent hole placement from cabinet to cabinet without re-measuring each front. The 5-1/16 inch center-to-center description ties directly to that metric value, which helps when replacing older pulls that were originally measured in inches while still matching the existing hole spread. The thread or screw size designated as M4 states the internal thread standard in the pull, so installers can use one screw diameter across doors and drawers and adjust only the screw length for different material thicknesses. The manufacturer part number 221-MB uniquely identifies this exact Schaub and Company pull, which simplifies ordering the same item again for later phases of a project or for service work that must match the original hardware. The matte black color reference allows hardware schedules to call out a single consistent finish across pulls, knobs, and related decorative pieces, which supports a unified look when multiple trades are working from the same specification.
The Schaub Classico pull has a 128 mm center-to-center spacing, described also as 5-1/16 inch, which sets the hole spread for drilling or matching existing cabinet fronts.
The 5-1/16 inch center-to-center dimension matches the 128 mm spacing, so installers working in imperial units can align or replace pulls using familiar inch measurements.
The pull uses an M4 thread size, which allows the use of standard M4 machine screws sized to the specific thickness of cabinet doors or drawer fronts on the project.
The product is described as matte black, which provides a dark, low-sheen appearance that coordinates with other matte black decorative hardware on cabinets or furniture pieces.
The Classico pull with part number 221-MB is from Schaub and Company, which helps buyers match this specific pull when ordering for new work or replacements.
The classification under decorative hardware and moldings, handles and pulls, indicates this part is intended as visible cabinet or furniture hardware for finish installations.
The Schaub Classico pull, 5-1/16 inch center-to-center in matte black, combines a clearly defined 128 mm hole spacing with an M4 thread interface, which supports predictable layout and fastening. When a project calls for matte black decorative hardware with this specific spread, choosing this 221-MB pull from Schaub and Company keeps hardware details consistent from drawing through final installation.