Schaub Classico pull 5-1/16 center to center describes a cabinet handle designed around a defined 5-1/16 inch center-to-center mounting dimension, so hole spacing is predictable when laying out new cabinetry or aligning with an existing drill pattern. The same pull is also specified at 128 mm center-to-center, giving metric-oriented shops a clear reference that simplifies layout on metric equipment and drawings. This pull is part of the Handles and Pulls category and the Schaub product class, so it suits projects that call for decorative cabinet hardware rather than utility-grade shop pulls. The product name identifies this piece as the Classico Pull from Schaub and Company, which helps match it across project documents and hardware schedules. The Signature Satin Brass finish called out in the name defines its visual tone, helping this pull serve as a consistent design element across doors and drawer fronts.
The specified 128 mm center-to-center spacing defines exactly where mounting points fall, which lets installers set up drilling jigs or CNC programs once and reproduce hole locations across many fronts. The same spacing expressed as 5-1/16 inches supports work on imperial-based layouts, so installers can match existing cabinetry that was bored on imperial centers. The web description lists the thread or screw size as M4, which defines the pullâs internal thread interface and affects which mounting fasteners engage properly. Using an M4 thread size across all pulls of this model lets production shops standardize on one machine-screw specification when assembling cabinets or furniture with this handle.
The web description defines this product as a pull in Signature Satin Brass, placing it squarely in decorative cabinet hardware work where finish consistency matters across installations. Because it belongs to the Handles and Pulls category, the piece is suited to doors and drawers on cabinetry or furniture rather than to internal mechanisms, so it plays the visible interface role a user grabs every day. The 5-1/16 inch, or 128 mm, center-to-center sizing gives this handle proportions that work well across medium-width fronts, helping it look balanced on standard cabinet doors or drawer faces. The branding as Schaub and Company and the manufacturer part number 221-SSB provide a precise reference, which helps designers, estimators, and installers all talk about the same handle when coordinating multi-room or multi-unit projects.
The clearly stated 128 mm center-to-center measurement defines a fixed drilling pattern that can be repeated across many projects, so jigs, templates, and CNC programs do not need constant adjustment for this model. When the same spacing is also expressed as 5-1/16 inches, it helps field installers translate shop drawings that may use a different measurement system, keeping fronts aligned even when work shifts from metric-based fabrication to imperial-based field fitting. The M4 thread specification built into the pull body standardizes the hardware interface, so purchasing teams can match it with M4 machine screws across drawers and doors that vary in thickness. The Signature Satin Brass identification in both the product name and SAP description keeps the finish callout consistent, supporting accurate reorders when a project expands or when damaged fronts are replaced and need visually matching hardware.
The Schaub Classico Pull, 221-SSB, has a 5-1/16 inch center-to-center size, which also equals 128 mm, so installers can plan hole spacing in either imperial or metric units.
The 128 mm center-to-center layout provides a precise, repeatable drilling pattern for metric-based shops, which supports efficient jig setup and consistent handle alignment across multiple fronts.
The pull uses an M4 thread size, so the internal thread in the handle matches M4 machine screws, helping standardize fasteners across cabinets using this model.
The 221-SSB pull is specified in Signature Satin Brass, which defines the color and sheen and supports coordinated finish selections across other visible cabinet hardware.
The pull is classified under Handles and Pulls in decorative hardware and moldings, so it is intended for visible cabinet and furniture applications where appearance is part of the scope.
Listing both 5-1/16 inch and 128 mm sizing lets imperial and metric workflows reference the same handle, which simplifies communication between designers, shops, and field installers.
The Schaub Classico Pull, 5-1/16 inch (128 mm) center-to-center in Signature Satin Brass, offers a clearly defined mounting pattern and M4 thread interface that align with common cabinet fabrication workflows. When a project calls for a decorative handle within the Handles and Pulls category, the 221-SSB identifier, verified dimensions, and finish description help this pull slot cleanly into drawings, orders, and installation plans.