Schaub Skyevale pull 1-1/4 CC is a cabinet handle from Schaub and Company designed for applications that match a 32 mm center-to-center layout. The pull provides a defined gripping point so doors and drawers can be opened with a consistent hand position. The satin nickel finish gives the pull a specific visual tone that pairs with satin nickel-focused jobs where the hardware needs to coordinate with hinges or other visible metal parts. Being part of the Schaub decorative hardware and moldings handles and pulls category places this item within a known line of cabinet hardware, which helps maintain visual continuity across a project. The 1-1/4 inch, or 32 mm, center-to-center sizing lets installers match European-style drilling patterns that are based around 32 mm spacing. This sizing supports straightforward layout on new cabinet work that follows that standard.
The Skyevale pull uses a 32 mm center-to-center spacing, so hole boring on cabinet faces can follow that fixed distance between fastener points to achieve a straight, repeatable install line. The specified thread or screw size of M4 defines the pull's internal thread interface, which lets installers choose matching M4 fasteners for secure mounting into the cabinet door or drawer front. Because the product is categorized under decorative hardware and moldings handles and pulls, it is expected to be mounted where the hand naturally reaches, which places emphasis on accurate alignment during installation. The satin nickel surface character allows the pull to sit visibly on painted or stained wood fronts without drawing attention to fastener locations, focusing the eye on the handle rather than the mounting holes.
This Schaub Skyevale pull, 1-1/4 inch center-to-center, fits cabinet doors and drawers drilled on a 32 mm pattern, so it aligns with layouts commonly used in system-based cabinetry. In shops and onsite work where cabinet fronts are patterned with 32 mm spacing, this pull allows installers to assign a handle location that matches existing drilling jigs. Being categorized as decorative hardware and moldings handles and pulls places this item in visible positions, such as kitchen, bath, or built-in storage fronts, where the satin nickel finish supports a defined look. The Schaub and Company branding means the pull coordinates with other Schaub handles and pulls, helping larger jobs carry the same style of hardware from one bank of cabinets to the next.
The 32 mm center-to-center measurement provides a fixed distance between mounting points, which helps installers mark or bore handle locations with a repeatable reference on multiple cabinet faces. That measurement works well with drilling guides or templates based on 32 mm spacing, which supports efficient production runs in the shop. The M4 thread detail tells installers which fastener thread engages the pull, so once the bore pattern is set, the same M4 threaded connection can be repeated across all doors and drawers using this model. The satin nickel finish also contributes to consistent results, because the color and sheen stay uniform from one pull to the next within the same 304-15 part number, supporting visually even hardware lines. Using a defined Schaub and Company part in the handles and pulls class ties the install to a specific hardware specification that can be documented on project drawings and reused on future phases that call for the same Skyevale style.
The Schaub Skyevale pull is designed for a 32 mm center-to-center layout, so it matches cabinet fronts bored with 32 mm spacing between handle mounting holes.
The satin nickel finish sets the pull's visual tone, allowing it to coordinate with other satin nickel cabinet hardware for a consistent appearance across doors and drawers.
The Skyevale pull lists an M4 thread or screw size, so its internal threads are sized to accept M4 fasteners during cabinet door and drawer installation.
The Skyevale satin nickel pull sits in the decorative hardware and moldings handles and pulls class, meaning it serves as a primary gripping point on cabinet fronts.
The 304-15 designation identifies this specific Schaub Skyevale satin nickel pull, helping projects call out and reorder the exact same model when matching hardware.
A 32 mm center-to-center pull is useful on cabinets built around the 32 mm system, since it aligns directly with that hole spacing for straightforward handle placement.
The Schaub Skyevale pull, 1-1/4 inch or 32 mm center-to-center, in satin nickel gives cabinet projects a defined handle size that matches 32 mm drilling patterns. The M4 thread detail ties directly into standard cabinet fastener choices, which supports efficient installation during production or onsite work. As part of the Schaub and Company decorative hardware and moldings handles and pulls line, the 304-15 model provides a repeatable hardware choice that can be speced once and applied across multiple cabinet runs for consistent appearance and function.
Sold In: 1 Each