Sorrento bowed pull 448 mm gives you a long, continuous grip for larger cabinet doors and drawers, which helps when you want a pull that visually lines up across wider fronts. This Schaub and Company pull is part of the Sorrento collection, so it brings a coordinated look when you repeat it across a room. The bowed design creates a smooth, arched handhold, which supports a comfortable grab along the full length of the pull.
The black chrome finish defines the look of this pull, adding a dark metallic tone that reads as decorative hardware rather than plain shop trim. The finish sits on a functional handle, so it works as both a grip point and a visual detail on finished cabinetry.
The 311-BC manufacturer part number clearly identifies this exact Sorrento bowed pull, which matters when you are matching existing hardware or specifying the same part across multiple cabinets.
The 448/480 mm center-to-center dimension defines the distance between the mounting points, which is important when drilling new fronts or aligning to existing holes on replacement work. This long spread supports use on wide cabinet applications where shorter pulls would look undersized.
The pull uses an M4 thread for its screw interface, which sets the thread size for the fastener engaging the pull. Knowing it is an M4 thread helps you match the correct screw type to the handle so the joint seats properly in the threaded section of the pull.
This Sorrento bowed pull is categorized under handles and pulls, Schaub, which places it directly in decorative cabinet hardware work. That classification signals use on finished cabinetry, casework, and similar woodworking projects where the pull is the main hand contact point.
The black chrome finish lets this pull function as a visual element on face frames or frameless cabinet fronts, so it can tie together darker hinges or matching decorative hardware. On tall doors, the long 448/480 mm center-to-center sizing helps the pull read at scale with the panel, instead of getting lost against a large surface.
For banks of drawers, repeating this same 448/480 mm center-to-center Sorrento bowed pull across multiple fronts keeps the hardware layout consistent, which helps when aligning hardware across a run of cabinets. The span of this pull supports two-handed operation on heavier drawers, giving users more leverage along the full handle length.
On wider doors or appliance fronts built into cabinetry, the generous center-to-center dimension also allows the pull to act as a substantial gripping bar. That longer grip can be helpful wherever doors or drawers carry more weight, because users can spread their hands across the bow instead of relying on a small knob.
The clearly listed 448/480 mm center-to-center measurement gives you a fixed drilling reference, which supports repeatable layouts when you are setting up drills or jigs for multiple fronts. Once that spacing is dialed in, you can reproduce the same hole pattern across every cabinet using this pull.
The use of an M4 thread guides you toward a consistent fastener interface at the pull, which helps the handle seat squarely against the door or drawer front. When every pull on a project uses the same M4 thread, it simplifies your hardware planning and helps keep installation steps uniform.
The 311-BC identifier for this Sorrento bowed pull also supports repeat orders, because you are tying your layout and jig settings to a specific part number. That means when you reorder 311-BC for future phases or repairs, the center-to-center and thread details match what was originally installed.
Being part of Schaub and Company decorative hardware allows this pull to be paired with other Schaub handles and pulls in the same project. That shared origin can help maintain a consistent visual language across different cabinet zones, even when you change pull lengths or styles within the overall Sorrento or related collections.
The Sorrento bowed pull 448/480 mm center-to-center value describes the spacing between mounting points, which guides drilling layouts and helps match the pull to wider cabinet doors or drawers.
The M4 thread on this pull sets the screw interface size, which means the fastening point is designed for M4-threaded screws so the pull seats correctly on the cabinet front.
The Schaub Sorrento bowed pull is classified as decorative hardware for handles and pulls, so it is used on finished cabinetry, casework, and similar woodworking projects needing a functional grip.
The black chrome finish on this pull provides a dark metallic look, which helps it coordinate with other black chrome decorative hardware and visually define the cabinet fronts.
The bowed design of this pull forms an arched gripping surface, which supports a comfortable handhold across the length of the handle on doors and drawers.
The 311-BC manufacturer part number identifies this exact Sorrento bowed pull, black chrome finish, which matters when ordering, reordering, or matching existing cabinet hardware.
The Schaub Sorrento bowed pull, 448/480 mm center-to-center with M4 thread, gives you a long black chrome handle sized for wider cabinet doors and drawers. The defined center-to-center dimension supports consistent drilling, while the bowed form offers a full, comfortable grip.
For projects where decorative hardware and function need to work together, this 311-BC Sorrento pull provides a clearly specified option you can repeat across cabinetry runs.