Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Schaub Sorrento Bowed Pull is a contemporary arch-profile cabinet pull sized for wide drawers, tall pantry fronts, and oversized door panels, mounting on 18-7/8 inch (480 mm) centers.
A pull at this center-to-center spacing is built for a different class of front than most cabinet hardware. At nearly 19 inches between mounting holes, it suits wide base drawers, full-height pantry doors, and island drawer banks where a shorter pull would look undersized against the panel. The arch form adds to the visual span without adding bulk at the grip, so the hardware reads as a single sweeping element rather than as two posts with a bar between them. Buyers replacing existing hardware at this spacing will find the 18-7/8 inch centers a less common pattern than 96 mm or 128 mm, so confirming the existing hole spacing before ordering is worth the step.
The pull is cast in zinc and finished in Matte Black. The low-sheen surface holds an even tone across the arch, which matters on a piece this long because a polished finish would pick up reflections differently at the crown of the bow than at the posts. Matte Black reads consistently from any angle, stays legible against both light and dark cabinetry, and wears without showing the contact marks that a polished surface accumulates at the grip. The arch cross-section itself is a departure from a straight bar: the curve is subtle enough to read as a line from across the room and present enough to give the hardware its own geometry up close.
This is hardware for a contemporary kitchen or built-in where the drawer or door fronts are wide enough to carry it. Wide base drawers in a 36- or 42-inch base cabinet, full-overlay pantry doors, and furniture-scale islands are the natural fits. Because the Sorrento collection spans multiple center-to-center sizes, a kitchen running narrower pulls on upper doors can step up to this spacing on the large lower drawers without leaving the same design language. It also suits a media console, a credenza, or a utility room storage wall where the drawer fronts are scaled for the case rather than for standard cabinetry dimensions.
The product name references both 448 mm and 480 mm. The structured center-to-center attribute for this SKU is 18-7/8 in (480 mm). Confirm the exact hole spacing on the spec block before drilling.
The projection is 1-1/4 inch (32 mm) from the face of the front to the back of the grip.
Zinc, with a Matte Black finish applied over it.
Yes. At this center-to-center spacing it works on any wide front, whether a door or a drawer, as long as the panel has enough width to accommodate the mounting holes.
The Sorrento series includes other center-to-center sizes, so narrower fronts in the same kitchen can carry a shorter Sorrento pull in the same finish without introducing a different design language.
When the drawer or door is wide enough that standard hardware reads as an afterthought, this pull provides the span and the finish to meet it.