Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Schaub Sorrento pull is a contemporary rectangular bar pull designed for cabinet doors and drawer fronts, mounting on 5-1/16 inch (128 mm) centers.
The 5-1/16 inch (128 mm) center-to-center spacing is the standard drilling pattern for mid-size drawer fronts and upper door hardware across a wide range of cabinet programs. Where an installer is working with pre-drilled European-style boxes or a kitchen built to this common pattern, this pull drops onto existing holes without any re-drilling. For a new installation, the 128 mm spacing gives a pull that sits comfortably on a drawer front in the 15 to 24 inch range, keeping the hardware proportional without crowding the face frame. The 5-3/8 inch overall length is the figure for clearance and visual fit; the 128 mm is the number to match to the holes.
The pull is cast in zinc and finished in Polished Chrome. Polished Chrome is a high-sheen, cool-toned surface that reflects light sharply along the flat rectangular faces of this pull, which accentuates the geometric profile rather than softening it. In a kitchen or bath that already runs chrome fixtures such as faucets, towel bars, or appliance handles, this finish joins those metals without introducing a second tone. It is a crisp, neutral choice that holds contrast against both light and dark fronts.
This pull is sized and styled for contemporary kitchens, modern baths, and built-in cabinetry where the hardware program calls for clean geometry and a reflective silver tone. The 128 mm spacing makes it a direct match for any cabinet drilled to that standard, which is common in both stock and semi-custom lines. Designers specifying a kitchen where pulls run on drawers and knobs run on doors will find the Sorrento series carries companion pieces that share the same design language and finish, keeping the mix coherent across the whole room. It is equally at home on a single vanity as it is repeated across a full run of base cabinets.
No. 128 mm converts to 5-1/16 inches, which is a distinct standard from the 5 inch (127 mm) spacing. If your existing holes are drilled to 128 mm, this pull is the match.
A polished surface is more likely to show smudges than a brushed or matte finish, though it wipes clean easily with a soft cloth.
The Sorrento series includes companion pieces in the same design language and finish, which is the practical way to mix pulls on drawers and knobs on doors without introducing a second style.
Overall length is 5-3/8 inches end to end. The mounting dimension, the number to match to your holes, is 5-1/16 inches (128 mm) center-to-center. The two are not the same figure.
When the cabinet is drilled to 128 mm and the hardware program calls for polished chrome, this Sorrento pull is the straightforward answer, no re-drilling, no finish compromise.