Schaub Armadio pull 1-1/4 in CC is a small decorative cabinet handle from Schaub and Company that gives cabinet doors or drawers a defined grip point, which helps users operate fronts consistently without touching finished surfaces. The pull sits in the Handles and Pulls class, so it is built for everyday opening and closing tasks on cabinetry where a fixed handhold is needed rather than a rotating knob. The satin nickel finish provides a muted metallic surface, which helps the pull visually coordinate with other satin nickel cabinet hardware in a run. A 32 mm center-to-center dimension between the fastener points creates a compact footprint, which works for narrow rails or small doors where space for hardware layout is limited. This pull is supplied by Wurth Baer Supply to serve woodworking projects that call for decorative hardware and moldings in a defined style family.
This Schaub and Company pull uses a 32 mm center-to-center mounting dimension, which establishes the distance between the two mounting points so drill guides or jigs can be set precisely for repeat drilling. The 1-1/4 inch center-to-center description reflects the same spacing in imperial terms, which helps installers work from either metric or inch-based layout references on shop drawings. The pull is designed to attach with M4-threaded fasteners, which means the mounting holes in the cabinet front are positioned to accept machine screws that match the metric thread pattern for firm engagement. As a decorative handle within the Handles and Pulls category, it mounts rigidly to the cabinet surface, creating a stable grip that does not pivot, which supports consistent hand placement and reduces movement at the hardware interface over time.
This Armadio pull from Schaub and Company is part of the decorative Handles and Pulls family, which suits cabinet doors or drawers where a defined linear grip is preferred over a round knob. The satin nickel finish supports projects that follow a satin nickel hardware palette, so designers can coordinate pulls with hinges or other cabinet hardware from the same color range for visual consistency. The 1-1/4 inch, or 32 mm, center-to-center size works well on smaller cabinet fronts, because the compact span leaves more material around the fastener points, which is useful on narrow rails or thin drawer fronts. In woodworking environments served by Wurth Baer Supply, this pull can be specified for residential or shop-built cabinets that call for decorative hardware and moldings under the Schaub product class, tying into a recognizable manufacturer line.
The defined 32 mm center-to-center measurement on this Schaub 361-15 cabinet pull gives installers a precise dimension for jig setup, which minimizes layout guesswork and supports consistent alignment across long cabinet runs. Using an M4 thread interface standardizes the screw type, which helps production shops stock one metric machine screw size for these pulls and speeds bench work when mounting multiple fronts. The satin nickel surface on the pull presents a finished face that does not require additional coating, which streamlines hardware installation as a final step after cabinet finishing is complete. Because the pull is clearly identified as a handle in the decorative hardware category, its straight mounting orientation along the drawer or door front defines a clear handhold, which aids users in grabbing the same point every time and reduces wear on adjacent finished wood or laminate surfaces.
The Schaub 361-15 Armadio pull is a decorative cabinet handle in the Handles and Pulls class, so it serves as a fixed grip point on cabinet doors or drawers.
This satin nickel pull has a 32 mm center-to-center, also described as 1-1/4 inch, which sets the spacing between the two mounting holes on the cabinet front.
The pull uses an M4 thread for its fastener interface, which means it is mounted with metric machine screws sized to M4 for secure attachment to the cabinet surface.
This Armadio pull has a satin nickel finish, which provides a muted metallic appearance that coordinates with other satin nickel cabinet hardware.
The pull is listed under Decorative Hardware and Moldings in the Handles and Pulls, Schaub class, placing it in the handle group rather than knobs or hinges.
This satin nickel Schaub and Company pull is supplied by Wurth Baer Supply, which serves the woodworking industry with cabinet hardware lines.
This Schaub satin nickel pull combines a compact 1-1/4 inch, or 32 mm, center-to-center layout with an M4 thread interface, which supports straightforward drilling and fastening on cabinet fronts. The satin nickel finish allows the handle to sit comfortably alongside other satin nickel pieces in a project, giving a consistent hardware look. As a decorative handle in the Schaub Handles and Pulls class, it provides a defined grip point where cabinet users expect to pull. For cabinet or woodworking jobs built around satin nickel hardware, this Schaub Armadio pull is ready to fit into the overall hardware plan.