Schaub Armadio arched pull delivers a long, continuous grip that spans wide cabinet or furniture fronts, which helps distribute pulling force across the surface. The pull uses a matte black finish that creates a dark, uniform look along the entire handle, supporting consistent visual lines on banks of doors or drawers. Center-to-center mounting options of 11-5/16 inches or 12-5/8 inches give two specific lengths to match drilling layouts, so installers can align this pull with existing hole patterns on larger fronts. The metric 288 mm or 320 mm center-to-center dimensions provide clear reference points for templating, which helps maintain consistent spacing when repeating the pull across multiple cabinets. A threaded interface specified as M4 thread size defines the fastener connection to the door or drawer, so installers can pair the pull with matching M4 fasteners for a snug mechanical fit. The arched shape lifts the gripping area away from the surface, which provides finger clearance along the full length of the handle.
The specified 11-5/16 inch or 12-5/8 inch center-to-center span sets the distance between mounting holes, which lets installers drill or route those positions before final cabinet assembly. Matching metric dimensions of 288 mm or 320 mm give a direct fit with metric drilling systems, supporting consistent alignment across rows of fronts. The M4 thread interface defines the pull's connection at each mounting point, so the handle seats squarely against the surface when tightened. Because the pull follows an arched profile, the grip area stands off from the door or drawer face, which can ease alignment by giving visual clearance around the mounting posts. The matte black finish extends across all visible areas of the pull, which helps minor layout variations blend into a single continuous line once a bank of cabinets is installed.
This Schaub Armadio arched pull sits in the Handles and Pulls category under decorative hardware and moldings, so it is positioned for use on cabinet doors, drawers, or furniture fronts where a visible handle becomes part of the finished look. The long arched form creates a continuous grip that is well suited to wider faces, which can help users open heavy or tall fronts using either one hand at the center or two hands near the ends. When mounted at the specified 11-5/16 inch or 12-5/8 inch center-to-center spacing, the pull defines a clear horizontal or vertical line across the surface, which can visually organize tall pantry doors or wide drawer banks. The matte black finish keeps the handle visually consistent from post to post, helping it read as a single design element against wood grain, painted finishes, or laminate fronts. With both inch and metric center-to-center values called out, shops working in different systems can still reference the same part number 365-MB during layout discussions.
The dual center-to-center dimensions of 11-5/16 inches and 12-5/8 inches, mirrored by 288 mm and 320 mm, give installers fixed reference points when repeating this pull across a project, which supports consistent sight lines and predictable drilling steps at the bench. Using the defined M4 thread for the pull's mounting connection standardizes the screw interface across each position, which simplifies tool setup and helps installers apply similar torque for every handle. The arched profile maintains the same stand-off along the length of the grip, which helps repeated pulls feel uniform when multiple fronts are opened in sequence on a run of cabinets. The matte black finish on the pull helps replacement work, because using the same 365-MB part number allows a new handle to visually match existing ones along a wall or island. Positioning this product within the Schaub and Company handle and pull class also supports consistent styling across other Schaub pieces on the same project, keeping the hardware family aligned across doors and drawers.
The Schaub Armadio arched pull 365-MB offers 11-5/16 inch and 12-5/8 inch center-to-center options, so installers can align the handle with specific drilling spans on wider cabinet doors or drawers.
The 288 mm and 320 mm center-to-center dimensions give metric references that match the inch values, which supports using metric jigs and keeps hole spacing consistent across European-style cabinetry.
The Schaub Armadio arched pull uses an M4 thread size at its mounting points, which defines the fastener interface and supports a snug, repeatable connection to the cabinet or drawer front.
This product is in the Handles and Pulls category under decorative hardware and moldings, which positions it for use on visible cabinet doors, drawers, and furniture fronts.
The matte black finish keeps the pull's surface uniformly dark, which helps banks of doors or drawers read as a coordinated set and can visually frame lighter cabinet materials.
The 365-MB part number identifies this specific Schaub Armadio arched pull, which helps shops reorder the same handle for replacements or for extending an existing run of cabinets.
The Schaub Armadio arched pull 365-MB combines a long, continuous grip with matte black styling, giving projects a defined handle line on wider fronts. With 11-5/16 inch or 12-5/8 inch center-to-center mounting and matching 288 mm or 320 mm dimensions, it aligns with both inch and metric layouts. The M4 thread connection standardizes the mounting interface, supporting consistent tightening across a job. For cabinet shops and installers planning visible hardware on doors, drawers, or furniture, this pull offers clear, repeatable dimensions tied to a single part number for streamlined ordering and layout.