Schaub Fonce appliance pull gives you a 12 inch center to center handle that visually ties tall doors and panels into a straight bar line. The matte black bar provides a dark, continuous grip surface that reads clean on modern millwork. Polished Nickel stems support the bar, creating a defined break between door face and hand contact area that helps the pull stand out on finished fronts. The mixed-finish design lets you coordinate with both dark fixtures and polished metal details on the same elevation. As a handle and pull from the Decorative Hardware and Moldings category, it serves as the primary grabbing point on large fronts so doors and panels can be worked repeatedly during daily use. Under the Schaub and Company brand, this Fonce appliance pull is specified by the 422-MB-PN part number for ordering and layout planning.
The 12 inch center to center dimension defines the hole spread for this Schaub Fonce appliance pull, guiding drilling locations on tall cabinet doors and appliance panels. That fixed spacing helps installers align multiple pulls along a bank of doors with even visual rhythm. The bar and stem configuration defines two mounting points, so the handle anchors at the stem locations while the bar spans between them. With the matte black bar set off by Polished Nickel stems, the mounting points act as visual markers on the face, which can assist alignment by eye during layout tasks. Referencing the 422-MB-PN identifier during planning ties drawings, purchase lists, and on-site layout to the same specific appliance pull.
The Schaub Fonce appliance pull is identified as an appliance pull in the Schaub handles and pulls class, so it is intended for larger fronts where a longer handle is useful. The 12 inch center to center length suits tall cabinet doors or appliance panels that benefit from a substantial gripping area along the stile. When positioned vertically on a tall door, the extended span provides multiple hand positions, which can help different users operate the same opening comfortably. Mounted horizontally on a wide front, the long bar visually balances the width, so the handle does not look undersized against the panel. The matte black bar finish keeps the grip area visually unified, which can help maintain a clean line across banks of tall units.
Polished Nickel stems at each end of the bar define the two mounting points, which matter when you are laying out holes near door edges or panel reveals. Those bright stems frame the bar and signal where the handle meets the surface, useful when aligning to adjacent hardware on neighboring doors. As part of Schaub and Company decorative hardware, this Fonce appliance pull can be specified alongside other handles and pulls in the same project scope, helping designers and installers maintain finish and style relationships across all openings.
The named 12 inch center to center dimension on this appliance pull directly controls the drill pattern, which is critical when repeating the handle across multiple doors and panels. Using that same spread on each opening allows installers to keep pulls at matching distances from door edges and rails, resulting in consistent sightlines. The bar-and-stem construction concentrates structural connection at the two stems, so the bar acts as a clear spanning grip while the stems handle interface with the door face. Matte black on the bar reduces visual interruptions along the hand contact area, so fingerprints and minor visual distractions are less apparent against the line of cabinetry. The Polished Nickel stems, by contrast, draw the eye to the anchor points, which can aid quick checks of handle alignment along vertical and horizontal runs.
As a Schaub Fonce appliance pull designated by part number 422-MB-PN, the product identity stays consistent from specification through installation, which helps avoid mixups between different pulls in the same handles and pulls category. The defined role as an appliance pull within Decorative Hardware and Moldings means it is chosen with larger fronts in mind, supporting layouts where a longer handle length is desired for leverage and proportion. Across a project, repeating this specific Fonce model on all tall doors and panels can establish a clear visual hierarchy between standard cabinet pulls and appliance-length hardware.
The Schaub Fonce appliance pull has a 12 inch center to center dimension, which sets the exact hole spacing for drilling on cabinet doors or appliance panels.
The matte black bar creates a continuous dark grip line across the door, which helps the handle stand out as a clear pull point on many cabinet finishes.
The Polished Nickel stems support the bar at each end and add a reflective accent, which visually separates the handle from the door surface for clearer alignment.
This Schaub Fonce appliance pull is identified for appliance and larger cabinet fronts, where a 12 inch center to center handle suits tall doors and panels.
The 422-MB-PN part number identifies this exact Schaub Fonce appliance pull with matte black bar and Polished Nickel stems for ordering and specification.
This product sits in the Schaub handles and pulls class within Decorative Hardware and Moldings, pairing with other Schaub pieces on the same project.
The Schaub Fonce appliance pull with 12 inch center to center layout, matte black bar, and Polished Nickel stems gives you a clearly defined handle for tall doors and appliance fronts. Ordering by the 422-MB-PN part number through Wurth Baer Supply keeps your decorative hardware selection tied to this specific Schaub and Company model, supporting consistent use across new builds or remodel runs.