Schaub Fonce bar pull 4 inch describes a non-adjustable bar pull designed with a 4 inch center-to-center layout, giving a predictable handle span that matches standard drilling patterns on many cabinet and drawer faces. The satin brass bar paired with satin brass stems creates a unified finish across the pull body and supports, which keeps the visual line consistent when the pull is lined up across multiple fronts. The product sits in the handles and pulls class under decorative hardware and moldings, so it functions as a standard cabinet or drawer pull in a hardware layout rather than as a specialty fitting. The Schaub and Company brand identity and 424-SB manufacturer part number provide a defined reference for ordering the same pull again on future jobs or matching existing installations that already use this specific satin brass bar pull.
The 4 inch center-to-center measurement gives a clear drilling distance between mounting holes, so layout can be transferred reliably from templates or jigs when spacing multiple pulls. The non-adjustable description confirms the stems remain fixed at that 4 inch spacing, which helps avoid field adjustments and keeps alignment straightforward once the hole pattern is set on doors or drawers. The #8-32 thread and screw size detail defines the fastener interface at each stem, tying the pull to a recognized thread standard common in cabinet work. That combination of fixed center-to-center spacing and standard thread spec supports repeatable mounting across cabinet banks or matching replacement work.
The bar pull sits in the decorative hardware and moldings category as a handle and pull, so it is oriented toward use on cabinet doors and drawers in woodworking or casework projects. The satin brass bar with satin brass stems gives a unified satin brass appearance, which supports designs where a single finish is carried across multiple fronts. In runs of cabinets, the fixed 4 inch center-to-center dimension lets this bar pull line up in a repeated pattern across upper, base, or drawer fronts. Because the Web description identifies the pull as satin brass and non-adjustable, it serves well where a consistent brass tone and a fixed handle span are desired rather than variable spacing. The Schaub and Company branding and precise 424-SB part number make it practical to specify this exact pull on drawings or material lists that call for satin brass hardware with a 4 inch center-to-center layout, helping align field installation with design intent.
The 4 inch center-to-center sizing is a key dimension because it drives drilling and jig setup, and that measurement repeats from cabinet to cabinet to keep hardware aligned. Pairing that fixed spacing with a non-adjustable stem design means the bar pull maintains the same geometry every time it is installed, reducing variation during cabinet runs. The satin brass bar and satin brass stems share the same stated finish, which minimizes visual breaks between grip and supports when multiple pulls are mounted on a bank of drawers or doors. The #8-32 thread and screw size spec connect the pull to a known fastener thread used widely in cabinetry, so it aligns with standard practice when threading into or through door and drawer fronts. Together, the defined center-to-center dimension, fixed stems, satin brass finish, and #8-32 interface support predictable layout, consistent appearance, and straightforward planning when integrating this Schaub Fonce bar pull into a decorative hardware schedule.
The bar pull uses a 4 inch center-to-center spacing, which sets the distance between mounting holes and guides drilling and layout on cabinet doors or drawers.
The product uses a satin brass bar with satin brass stems, providing a consistent satin brass finish across the grip area and supports for unified visual results.
Non-adjustable means the stems stay fixed at the 4 inch center-to-center spacing, so the mounting distance does not change once cabinet holes are drilled.
The bar pull is specified with a #8-32 thread and screw size, tying it to a common cabinet hardware standard for fastening to doors and drawers.
The pull is made by Schaub and Company and identified as manufacturer part number 424-SB, which helps specify or reorder the exact satin brass model.
The pull sits in the decorative hardware and moldings handles and pulls class, so it functions as a standard cabinet or drawer pull within hardware layouts.
The Schaub Fonce bar pull 4 inch center-to-center layout, non-adjustable stems, and satin brass bar with satin brass stems provide a clearly defined handle choice for cabinets and drawers. The #8-32 thread and screw size interface connects the pull to a recognized cabinet hardware standard, which supports consistent fastening plans. For projects that call for a satin brass bar style handle in the decorative hardware and moldings handles and pulls category, this 424-SB model gives a specific, repeatable option that aligns easily with drawings, drilling jigs, and hardware schedules.