Company Information
Services
Approved US Government VendorCage Code: 1UXJ6
Copyright © 2004-2026, Würth Baer Supply Company. All Rights Reserved.
Copyright © 2004-2026, Würth Baer Supply Company. All Rights Reserved.
Schaub Finestrino flat rectangle pull is a cabinet handle from Schaub and Company that provides a flat, rectangular grip profile, giving doors and drawers a defined pull area that is easy to locate by feel during regular use. The 5-1/16 inch center-to-center dimension describes the distance between the mounting holes, allowing installers to match this pull to a layout based on that common hole spacing. The 128 mm center-to-center specification expresses the same mounting spread in metric, which supports layouts or jigs set up in millimeters on cabinet and fixture projects. The matte chrome finish creates a low-sheen metal surface, which helps reduce glare under task lighting while coordinating with other matte chrome components on a job. The M4 thread detail identifies the pull's screw interface, giving installers a specific metric thread standard to work with when planning mounting into cabinet fronts or drawer faces.
The 5-1/16 inch center-to-center mounting dimension lets installers position this pull on cabinet doors and drawers using common imperial layout marks, which can streamline drilling when working off a standard hardware plan. The 128 mm center-to-center metric listing supports projects where hardware locations are laid out with metric-based jigs, allowing the same pull to fit both imperial and metric workflows in the shop. The flat rectangle pull geometry creates a straight line between the two mounting points, giving installers a clear visual cue for leveling the handle relative to door edges or drawer fronts. The M4 thread specification ties the pull to a specific metric thread size, so the threaded engagement into the front material can be planned with that interface in mind on cabinet builds and retrofits.
This pull is identified as a rectangle pull with a flat profile, which positions it well for cabinet doors and drawers where a straight, linear grip is preferred for a clean look and predictable handling. The 5-1/16 inch center-to-center measurement describes a spread that works on wider drawer fronts and proportionally sized cabinet doors, helping the handle sit balanced across the face. The 128 mm center-to-center equivalence means the same handle can be applied on projects documented in metric, useful in shops that alternate between imperial and metric drawings. As a product in the handles and pulls category within decorative hardware and moldings, it is suited to applications where visible hardware contributes to the finished appearance of casework, built-ins, or furniture-grade cabinetry. Being produced under the Schaub and Company brand ties it into a defined decorative hardware line, which can support consistent styling when multiple handles are specified from the same series.
The flat rectangle pull shape establishes two distinct mounting points connected by a straight bar, giving installers an obvious visual reference for aligning the handle parallel to cabinet edges and drawer lines. The 5-1/16 inch center-to-center specification provides a fixed hole spacing that can be used to set up drilling jigs, which helps keep hardware positions uniform across a full run of cabinets. The 128 mm center-to-center notation lets the same spacing be programmed or measured in metric, aiding CNC-based or metric-focused shops in maintaining exact alignment. The matte chrome finish creates a consistent surface appearance across multiple pulls, so when several units are installed on the same elevation, the hardware presents a unified look under ambient and task lighting. The M4 thread detail establishes a single thread standard for the pull, allowing installers to work with one metric thread size across a project, which can simplify hardware management during cabinet installation.
The 445-M26 pull is a Schaub Finestrino flat rectangle pull categorized as a handle and pull, which positions it for use on cabinet doors and drawers that need a graspable front-mounted handle.
The 5-1/16 inch center-to-center size indicates the distance between the two mounting holes, guiding drilling layouts so the pull aligns properly across doors and drawers.
The 128 mm center-to-center measurement restates the same hole spacing in metric, which helps metric-based shops set up jigs or CNC programs for consistent pull placement.
The pull has a matte chrome finish, giving it a non-gloss metal surface that coordinates with other matte chrome hardware in decorative cabinet installations.
This cabinet pull uses an M4 thread size, which defines the metric threaded interface and assists with selecting matching fasteners for mounting to cabinet fronts.
The flat rectangle shape provides a straight, defined gripping surface, giving users a predictable place to pull when opening cabinet doors or drawers.
The Schaub Finestrino flat rectangle pull, 5-1/16 inch center-to-center, matte chrome, offers a defined rectangular grip with mounting spaced at 5-1/16 inches or 128 mm, so layouts can follow either imperial or metric dimensions. The M4 thread interface gives you a specific metric thread to work with when planning cabinet or drawer front mounting. For cabinet hardware selections where a flat rectangle pull and matte chrome finish match the design intent, this handle provides clearly stated dimensions and thread details that support efficient layout and installation.