Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Schaub Haniburton Pull 4 CC Satin Nickel is a cabinet handle from Schaub and Company that provides a defined grip point for opening and closing doors or drawers, which supports smooth, repeatable operation in everyday woodworking and cabinet projects. The 4 inch center-to-center measurement between fastener holes sets a consistent handle spacing, helping maintain a uniform layout when multiple fronts are drilled on a run of cabinets. The satin nickel finish on the pull establishes a neutral metal look that coordinates with many cabinet colors, allowing straightforward hardware selection across different jobs. As part of the Decorative Hardware & Moldings category, this pull is designed for visible locations, so the form factor functions as both a working handle and a finished detail on the face of the cabinet. The product class of Handles and Pulls, Schaub ties it directly to Schaub and Company designs, which helps keep handle style consistent when a project uses multiple pieces from the same line.
The stated 4 inch center-to-center measurement defines the spacing between mounting points on this Schaub Haniburton pull, which guides where to drill or route handle holes on cabinet doors or drawer fronts. Because that dimension is fixed, jigs or templates can be set to 4 inch spacing and used repeatedly, helping keep handles aligned from one front to the next. The thread and screw size of #8-32 describes the fastener interface in the pull, so a #8-32 machine screw pairs with the pull body during installation onto the cabinet substrate. Using that thread size across all pieces on a job allows one screw specification to serve wherever this specific pull is installed, supporting a consistent fastening approach on the project.
This Schaub Haniburton pull in satin nickel is positioned within Decorative Hardware & Moldings in the Handles and Pulls, Schaub class, which situates it for use on cabinet doors, drawers, and similar woodworking fronts where a handle is required. The pull format gives a front-mounted grip point, so it functions well on face-frame or frameless cabinet designs that rely on surface-mounted hardware. With a 4 inch center-to-center layout, the pull aligns with layouts that standardize on that spacing, allowing it to work across kitchen, bath, or storage cabinetry built around that hole pattern. The satin nickel finish allows the same part number 474-15 to appear on multiple cabinet types within one space while keeping a unified metal tone on all visible handles. In practice, this lets a shop or installer specify the same Schaub and Company pull wherever a matching satin nickel handle is required.
The defined 4 inch center-to-center dimension lets installers and fabricators rely on a single measurement when placing this pull, which helps maintain consistent handle alignment across banks of drawers or tall cabinet doors. That fixed spacing also supports the use of drilling jigs set to 4 inch centerlines, reducing layout steps and contributing to uniform hardware placement from piece to piece. The #8-32 thread / screw size provides a clear fastener specification, so the pull interfaces with #8-32 screws during mounting to the cabinet material. Working with that standardized thread simplifies hardware selection on the bench, because the same screw type can be applied wherever this pull is used on a project. The satin nickel finish delivers one defined finish choice under the Schaub and Company brand, which helps maintain a coordinated look across handles installed at different stages of a job, even when work is spaced over multiple days.
The Schaub Haniburton pull has a 4 inch center-to-center dimension, which sets the distance between mounting holes and supports consistent drilling layouts across multiple cabinet fronts.
The pull has a satin nickel finish, providing a neutral metal tone that coordinates with many cabinet colors for a unified appearance on visible hardware surfaces.
The pull uses a #8-32 thread size, so it is designed to work with #8-32 screws, giving a clear fastener specification for mounting onto cabinet doors or drawers.
The Haniburton satin nickel pull is from Schaub and Company, placing it within the Handles and Pulls, Schaub class for decorative cabinet hardware projects.
The 4 inch center-to-center spacing lets installers standardize drilling jigs and hole locations, supporting even handle alignment across doors and drawers on the same run.
The manufacturer part number is 474-15, which uniquely identifies this satin nickel Haniburton pull when matching or reordering cabinet hardware.
The Schaub Haniburton pull with 4 inch center-to-center drilling, #8-32 thread size, and satin nickel finish offers a defined handle option for cabinet and woodworking work through Wurth Baer Supply. Those verified details let you match drilling patterns, screw type, and finish across a project where a Schaub and Company handle in satin nickel is desired. When a job calls for a consistent 4 inch layout and a satin nickel decorative pull under part number 474-15, this handle aligns directly with that requirement.