Schaub Menlo Park pull 5 inch describes a cabinet pull from Schaub and Company that is designed as decorative hardware in the handles and pulls category, so it serves as a visible touchpoint whenever doors or drawers are opened. The pull has a 5 inch center-to-center dimension, which spaces the mounting holes at that distance and supports consistent alignment when drilling or replacing existing pulls with the same spread. The polished nickel finish gives the pull a bright metallic appearance, which provides a defined look on cabinet faces and can coordinate with other polished nickel hardware in the same area. The product is identified by manufacturer part number 523-PN, which ties this specific Menlo Park pull style and finish together so matching and reordering remain straightforward. As decorative hardware, this pull adds a finished look while functioning as the working handle on cabinets.
The 5 inch center-to-center dimension on this pull sets the exact spacing for the two mounting points, which simplifies layout when drilling new cabinet fronts or aligning with existing 5 inch hole patterns in a retrofit. The thread or screw size #8-32 detail defines the thread standard used at each mounting point, so installers can pair the pull with #8-32 machine screws suited to the door or drawer thickness being worked on. As a cabinet pull from the handles and pulls category, this piece mounts through the face of doors or drawers, allowing it to act as the main grip while keeping the fasteners accessible from the interior side during installation or changeout.
This product is described as a pull in polished nickel with a 5 inch center-to-center layout, which positions it as a handle for cabinet doors or drawers where that hole spacing is planned or already drilled. Being part of decorative hardware and moldings under handles and pulls, it is suited to applications where the pull is both a working handle and a visible design element on finished cabinetry. The polished nickel finish gives it a bright metallic surface that visually pairs with other polished nickel hardware, helping maintain finish continuity across hinges, knobs, and other components chosen with the same appearance. Because the manufacturer part number 523-PN specifically identifies this Menlo Park pull variant, it can be specified confidently in project documents whenever this style, size, and finish combination is desired.
The 5 inch center-to-center dimension is central to planning repeating cabinet layouts, because that measurement drives drilling patterns and ensures every pull in a run aligns horizontally and vertically when measured from door edges. When retrofitting, that same 5 inch spacing allows this pull to match existing hole patterns drilled at 5 inches, reducing rework on finished cabinet fronts. The thread or screw size #8-32 specification defines the pull's internal thread standard, which aligns with common cabinet machine screw hardware and helps installers select or use fasteners that engage correctly with the pull. As a Schaub and Company pull in the Menlo Park style, this part lets shops and installers keep a consistent design language across multiple cabinets by referencing the 523-PN identifier whenever the same look, size, and finish are needed again on future work.
The Schaub Menlo Park pull 5 inch center-to-center size sets the distance between the two mounting holes, guiding drilling layouts and helping it match cabinets already bored at 5 inches.
The polished nickel finish on this pull creates a bright, reflective metal look, so it visually coordinates with other polished nickel hardware and gives cabinet faces a defined, metallic accent.
This pull is listed under decorative hardware handles and pulls, so it is used on cabinet doors and drawers where a functional grip also serves as a visible design element.
The thread size #8-32 on this pull defines the internal machine screw thread, guiding selection of compatible fasteners for mounting through cabinet doors or drawers.
The manufacturer part number 523-PN uniquely identifies this Menlo Park polished nickel pull, which supports accurate specification, ordering, and matching across multiple cabinet installations.
The 5 inch center spacing lets this pull align with existing 5 inch hole patterns, so it can replace earlier pulls drilled to that standard without altering cabinet front layouts.
The Schaub Menlo Park pull, 5 inch center-to-center in polished nickel, combines a defined hole spacing with a specific finish so cabinet layouts and appearance can be planned together. The pull's role in decorative hardware and moldings under handles and pulls means it functions as both a working handle and a visible style choice on doors and drawers. With the 523-PN part number and #8-32 thread or screw size defined, this pull can be specified wherever a 5 inch center polished nickel handle is needed on cabinetry projects.