Schaub Menlo Park arched pull gives cabinets a defined grip point with a curved profile, so doors and drawers open with a solid handhold along the arc. The 5 inch center-to-center dimension sets consistent spacing between fasteners, which helps line up multiple pulls across a run. Signature satin brass finish provides a brass tone with a satin surface, which supports a finished look that reads coordinated across doors and drawer fronts. As a decorative handle in the Handles and Pulls class, it serves as the primary touch point on cabinet fronts, which matters on high-use installations. Schaub and Company branding ties this pull to a known decorative hardware line, which helps match this piece to other Menlo Park items by visual style when building a set.
The 5 inch center-to-center dimension describes the distance between the threaded mounting points, which lets installers lay out holes accurately before drilling cabinet faces. Thread / screw size #8-32 defines the machine-thread interface at each mounting hole, which guides selection of matching #8-32 fasteners for attachment through the cabinet front. Identifying this pull as arched signals that the gripping surface rises away from the door or drawer face, which keeps the contact area accessible after mounting. As a pull in the Handles and Pulls class, it is designed for through-bored mounting, so the front side shows the arched handle while the threaded connection is on the back.
As a decorative handle in the Handles and Pulls, Schaub class, this Menlo Park arched pull fits cabinet doors and drawers needing a pull-style opening point. The 5 inch center-to-center measurement supports layouts on face frames and frameless fronts that are planned around that spacing. Signature satin brass finish defines the visual tone of the pull, which coordinates with other satin brass decorative hardware elements within a project. The arched pull shape sets a consistent design cue across all fronts using this piece, which helps tie together doors, wide drawers, and narrow pull-outs under one style. Placement under Decorative Hardware & Moldings identifies it for visible cabinet locations where appearance and handling are both part of the specification.
The 5 inch center-to-center dimension acts as a template number that can be reused on drilling jigs, which helps installers repeat hole locations across banks of cabinets without re-measuring every front. The thread size #8-32 spec unifies the fastener interface for this pull, which streamlines hardware setup when multiple Schaub 527-SSB pulls are being mounted on the same job. The Schaub and Company brand and 527-SSB part number link this pull to a specific model, which simplifies re-orders or matching during later phases of a build. The Signature satin brass finish gives a consistent satin brass surface across every pull of this model, which supports uniform appearance when many units are installed side by side. The arched design defines how the hand approaches the pull, which keeps operation familiar anywhere this Menlo Park piece is used.
The Schaub Menlo Park arched pull uses a 5 inch center-to-center measurement, which sets the spacing between mounting holes for drilling and layout work.
The pull has a Signature satin brass finish, which provides a satin brass appearance suited to projects calling for that specific tone.
The pull uses thread size #8-32 at the mounting points, which determines the machine-thread fasteners that engage the pull.
As a pull in the Handles and Pulls category, it serves as the gripping handle on cabinet doors and drawers where a pull-style opening point is needed.
The 527-SSB manufacturer part number identifies this exact Menlo Park arched pull model, which helps match product selection and ordering.
The arched design raises the grip surface off the cabinet front, which provides finger clearance and a defined handhold during opening.
This Schaub Menlo Park arched pull in Signature satin brass offers a defined 5 inch center-to-center dimension and #8-32 threaded interface, which supports straightforward layout and fastening on cabinet fronts. As a decorative handle in the Handles and Pulls, Schaub class, it is suited to doors and drawers needing a pull-style touch point in a satin brass tone. When a project calls for satin brass decorative hardware with a consistent arched form and known mounting spacing, this 527-SSB pull aligns to that specification.