Schaub Menlo Park arched pull describes a cabinet handle from Schaub and Company that uses an arched shape to give doors and drawers a defined grab point, which helps installers and users open cabinetry with a consistent hand feel across a run of fronts. The 12 inch center-to-center dimension places the mounting holes on a predictable spread, which matters when laying out drilling patterns or matching existing 12 inch on-center pulls during a hardware changeout. The polished chrome finish identifies a bright, reflective surface that coordinates with polished chrome hinges or faucets, helping shops keep visible hardware finishes consistent on a project. The #8-32 thread size defines the screw interface in the pull, so fabricators can match machine screws tapped to that thread when working with thicker drawer fronts or specialty door constructions that need longer fasteners.
The 12 inch center-to-center specification tells installers exactly where to locate the two mounting holes along the cabinet front, which simplifies jig setup or CNC programming when repeating the same pull across many parts. Using a #8-32 thread in the pull body means the internal mounting points are machined for that machine-screw standard, so hardware techs can select #8-32 fasteners in different lengths to suit door or drawer front thickness while keeping the thread engagement consistent. The arched form of the pull sets its grip area off the surface of the cabinet, which helps during install alignment because the arch visually highlights whether the pull is level relative to door edges.
This Menlo Park arched pull from Schaub and Company falls in the decorative hardware and moldings category under handles and pulls, so it is suited for cabinet doors and drawers that call for a handle-style grip rather than a knob. The 12 inch center-to-center layout works well on wider doors or large drawer fronts, because the long hole spread positions the hand closer to the outer portions of the panel, helping users pull heavier storage sections with less twist. When updating existing cabinetry that already has 12 inch on-center holes, this pull aligns with that spacing, which allows replacement work without altering the basic drilling pattern on the fronts. The polished chrome finish ties into projects designed around bright, modern metal tones, which can coordinate with polished chrome plumbing or appliance trim in the same room.
The defined 12 inch center-to-center dimension gives shops a fixed reference when building drilling templates, so once the first cabinet is laid out correctly, the same jig can be applied across an entire job for consistent handle placement. The arched construction shapes the hand clearance in a predictable way that helps designers know how far the grip stands off the face, which is useful when planning clearances near adjacent doors, tall pantry units, or stacked drawer banks in tight runs. Because the pull taps for a #8-32 screw, fastener selection becomes straightforward in the shop: technicians can choose the correct screw length for the material stack while relying on a single thread standard. The polished chrome surface reflects light along the pull, making it easier to visually confirm alignment against cabinet edges during install, which reduces rework caused by pulls that appear slightly skewed once the fronts are hung.
The pull suits cabinet doors and drawers where a handle-style grip is needed, and the 12 inch center-to-center spacing matches wider fronts that benefit from a longer handhold.
The 12 inch center-to-center spacing provides a fixed distance between mounting points, allowing installers to set up jigs or CNC programs once and repeat hole locations accurately.
The #8-32 thread size means each mounting point is tapped for that machine-screw standard, so installers can use #8-32 screws in appropriate lengths for door or drawer thickness.
The polished chrome finish provides a bright, reflective surface that visually coordinates with other polished chrome hardware, helping maintain a consistent look throughout a project.
The arched design lifts the grip off the cabinet face, giving fingers more clearance and creating a defined handhold that feels consistent across multiple doors or drawers.
Schaub and Company identifies the manufacturer and places the pull in their decorative hardware and moldings line, which helps shops align it with other Schaub handles and pulls.
This Schaub Menlo Park arched pull with a 12 inch center-to-center layout, polished chrome finish, and #8-32 threaded mounting points gives cabinet shops a defined handle format that aligns with standard drilling patterns. For projects needing a long, arched pull in polished chrome, this model keeps mounting dimensions and thread standards straightforward while supporting consistent alignment across doors and drawers.