Schaub Menlo Park arched appliance pull gives large appliance doors a defined grasp point using a 15 inch center-to-center layout, which helps align the handle with tall door proportions on panels and built-in units. The brushed nickel finish provides a consistent metallic look across visible hardware surfaces, supporting a unified appearance when matching other brushed nickel components. As an appliance pull in the Menlo Park family from Schaub and Company, it serves as a substantial handle for panel-ready appliances where a longer pull suits wider or taller faces. The handle design is arched, creating clearance between the hand and door surface, which helps with leverage when operating heavier doors. Identified by manufacturer part 539-BN, it gives project planning a repeatable reference when specifying multiple pulls across a kitchen layout or matching existing Menlo Park pieces.
This appliance pull uses a 15 inch center-to-center measurement, so the two mounting points are set apart by that distance to establish a long, balanced grip on appliance fronts. The specification of 1/4-20 thread size defines the screw interface for the pull, which ties directly to the hardware selection and drilling for threaded inserts or through-bored mounting. As an arched design, the pull stands off from the surface, so the fixed mounting points work with the curve to provide both clearance and a stable feel when the door is opened or closed. Being set in the Handles and Pulls category, it is shaped for hand contact, so the mounting dimensions directly influence how it feels when installed on a tall door panel.
This Schaub Menlo Park arched appliance pull is described specifically as an appliance pull, so it is suited to doors on appliances that accept decorative fronts, where a longer handle supports the extra height or width. The 15 inch center-to-center spacing positions the grip over a broad section of the door, which helps distribute pulling force along the face when operating heavier or insulated panels. As a brushed nickel appliance pull, it visually matches other brushed nickel decorative hardware elements, which matters on full kitchen runs where continuity across doors, drawers, and appliance fronts is important. The Handles and Pulls classification confirms its role as a primary touch point on these surfaces, so its size and arched form are intended for frequent use in day-to-day appliance operation.
The defined 15 inch center-to-center dimension gives installers a fixed measurement for boring or fitting mounting points, which supports consistent vertical alignment when multiple appliance pulls repeat down a bank of tall units. With the thread size specified as 1/4-20, the pull pairs with matching threaded fasteners, so the interface between pull and door can be planned to handle the weight and thickness of appliance panels reliably. The arched design describes a curved profile off the surface, which influences how far the hand sits from the panel and can help reduce contact with adjacent trim or raised profiles. Because the pull is identified by Schaub and Company manufacturer part 539-BN, layouts can be documented by that number so later replacements or additions maintain the same dimensions, finish, and grip shape, limiting visual variation across the installation.
The 15 inch center-to-center size describes the spacing between the two mounting holes, guiding drilling and layout so the pull spans a larger area on an appliance door.
The brushed nickel finish gives the pull a muted metallic look, allowing it to coordinate with other brushed nickel decorative hardware for a consistent visual style.
The Menlo Park arched appliance pull is described for appliance use, fitting panel-ready or built-in appliance doors where a longer handle suits taller or wider fronts.
The arched design curves the pull away from the surface, creating hand clearance from the door face and supporting a more comfortable grip on thicker appliance panels.
The 1/4-20 thread size defines the fastener interface, helping installers match screws and prep appliance panels to secure the pull properly to the door structure.
Manufacturer part 539-BN precisely identifies this Menlo Park pull, so future additions or replacements can use the same finish, dimensions, and design across the project.
The Schaub Menlo Park arched appliance pull with 15 inch center-to-center spacing and 1/4-20 thread sizing provides defined mounting dimensions for appliance fronts. The brushed nickel finish and arched form give projects a consistent look and a clear, comfortable handhold on taller or heavier doors. Using the 539-BN part number connects layout notes and ordering, so additional pulls match the same Menlo Park design, finish, and dimensions across cabinetry and appliance installations.