
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Schaub Atherton pull 4 inch CC identifies this pull as a 4 inch center-to-center cabinet handle from Schaub and Company, giving installers a known layout dimension when drilling or aligning holes on doors and drawer fronts. The Atherton pull with plain footplates provides a continuous mounting surface at each end, helping spread load around the fastener holes on cabinet faces. The polished nickel finish provides a bright metallic appearance that ties into other polished nickel decorative hardware in a project for a consistent look. This pull is part of the decorative hardware and moldings category under handles and pulls, so it is intended as the working grip point on cabinet doors or drawers. The 579-PN manufacturer part number uniquely identifies this exact Atherton pull configuration, allowing straightforward reordering or matching across multiple rooms or phases.
The 4 inch center-to-center dimension on this Atherton pull determines the distance between the two mounting points, giving installers a clear drilling pattern for cabinet doors and drawers. The pull uses a thread or screw size of #8-32, so the internal threading is designed to accept #8-32 machine screws for secure attachment into the back of the pull. Plain footplates at each end of the pull provide flat contact areas against the cabinet face, which helps the pull sit flush when tightening the #8-32 fasteners from the inside of the cabinet or drawer. The polished nickel finish on the pull presents a uniform surface around the mounting points, so alignment and squareness are visually easy to judge while tightening during installation.
This Atherton pull with plain footplates and 4 inch center-to-center spacing is suited to cabinet applications where a two-point mounted handle is needed for doors or drawers in the decorative hardware and moldings category. The 4 inch center-to-center layout matches common cabinet drilling patterns, which supports use across multiple fronts in kitchens, baths, or built-in casework that rely on standardized hole spacing. Plain footplates at each end give the pull visual mass at the contact points, making it appropriate on both small and medium cabinet fronts where a defined mounting footprint is preferred. The polished nickel finish positions this pull for projects using polished nickel faucets, hinges, or other handles and pulls, helping the hardware presentation stay unified from cabinet to cabinet.
The defined 4 inch center-to-center dimension allows installers to work from templates or boring machines set to that spacing, promoting repeatable alignment and even handle heights across large cabinet runs. Thread or screw size #8-32 means the threaded sockets in the pull are consistent, so once an installer sets a standard screw length and drilling depth, the pull tension and projection remain predictable from door to door. Plain footplates create flat landing areas that rest fully on the cabinet face when the #8-32 fasteners are tightened, helping resist rocking at the ends and supporting a crisp contact line against painted or stained surfaces. The polished nickel surface reflects surrounding light along the length of the pull, which accentuates any out-of-square mounting, so the defined geometry of the Atherton pull helps installers visually verify straight, parallel alignment while fastening.
The Atherton pull is specified as 4 inch center-to-center, so the mounting holes on the cabinet need to be spaced 4 inches apart for proper alignment.
The 579-PN Atherton pull has a polished nickel finish, which provides a bright metallic appearance that coordinates with other polished nickel hardware in the space.
The Atherton pull uses thread or screw size #8-32, so fasteners with #8-32 machine threads engage properly with the pull for secure mounting.
The plain footplates provide flat contact areas at each end of the pull, which helps distribute clamping force at the mounting points and creates a defined visual footprint on the cabinet face.
This pull is produced by Schaub and Company and falls within their decorative hardware and moldings handles and pulls offering, aligning it with other Schaub decorative pieces.
The manufacturer part number 579-PN uniquely identifies this Atherton pull configuration, simplifying ordering, reordering, and matching across multiple cabinet areas on the same job.
The Schaub Atherton pull with plain footplates, 4 inch center-to-center layout, and polished nickel finish offers a defined handle solution for cabinet doors and drawers in decorative hardware and moldings projects. The specified #8-32 thread interface supports consistent fastening into the pull, which helps maintain even tension across a full run of fronts. The 579-PN part number ties every installed pull back to the same Schaub and Company design, supporting visual continuity wherever this handle is used. For cabinet work calling for a 4 inch center-to-center polished nickel handle, this Atherton pull provides a clearly specified option ready to integrate into a planned drilling pattern and hardware schedule.