Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Schaub Vinci pull is a traditional bar pull for cabinet drawers and doors, mounting on 3-1/2 inch (89 mm) centers in an Antique Bronze finish.
The 3-1/2 inch center-to-center spacing puts this pull in the range that suits upper cabinet doors and narrower drawers, the kind of front where a longer pull would visually overrun the panel. A spice drawer, a narrow utility drawer, or an upper door on a painted or stained face-frame kitchen is the natural home for a pull at this spacing. It also makes for a clean replacement on cabinetry already drilled to 3-1/2 inch centers, since no new holes are needed.
The Antique Bronze finish delivers a layered, darkened surface with warm brown undertones rather than the flat color of a matte finish or the glare of a polished one. It reads well against stained wood, painted cream or white cabinetry, and furniture-style pieces where the hardware is meant to look like it has always been there. The finish belongs to the Bronze Tone family, so it coordinates visually with other warm brown hardware in the same space. Material Type is not populated in the source data for this SKU; do not infer the base material from the finish name.
Designers running a traditional or transitional kitchen program reach for this pull when the hole pattern is already set at 3-1/2 inches and the finish direction is warm bronze. Cabinet shops fitting out a furniture-style island or a hutch benefit from the compact overall length, which leaves adequate clearance on narrower stiles and rails. Homeowners replacing hardware on an existing kitchen drilled to this spacing can swap in these pulls without touching a drill. The Vinci collection spans multiple center-to-center sizes, so mixing a knob on doors with this pull on drawers from the same series keeps the design language consistent across the run.
Center-to-center is 3-1/2 inches (89 mm), the distance between the two mounting holes. Overall length is 3-5/8 inches (92 mm), the full end-to-end size of the pull. The mounting holes determine the drill pattern; overall length determines how much of the front the pull covers.
If your current pull is described by its center-to-center measurement and that figure is 3-1/2 inches (89 mm), this pull mounts on the same holes. Confirm by measuring between the centers of the two holes rather than reading the overall length of the existing pull.
Finish names are not standardized across manufacturers. Antique Bronze on this Schaub Vinci pull is specific to the Vinci collection. For guaranteed coordination, stay within the Vinci series.
The Vinci collection is available in multiple center-to-center sizes. Other variants in the family cover spacings from 3-3/4 inches up through larger formats suited to wide drawers and appliance-scale fronts.
For cabinetry already drilled to 3-1/2 inch centers and a room running warm bronze tones, this pull drops in, coordinates with companion Vinci pieces, and reads as though it was always part of the design.