Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Schaub Vinci pull is a traditional bar pull for cabinet doors and drawer fronts, finished in Black Bronze and mounting on 3-1/2 inch (89 mm) centers.
At 3-1/2 inches between hole centers, this pull suits the narrower drawers in a kitchen stack, the small doors on a face-frame cabinet, and the drawer fronts on furniture-style vanities where hole patterns tend to run tighter than on modern frameless boxes. It also fits a common vintage hole spacing, making it a practical choice when replacing worn hardware on older cabinetry without redrilling. The 3-5/8 inch overall length adds just enough length beyond the centers to frame the bar cleanly on the front without overhanging a narrow stile.
Black Bronze is not a flat or uniform black. It carries depth and a warm undertone that shifts with the light, sitting somewhere between oil-rubbed bronze and matte black on the spectrum. On darker wood fronts it reads as a tonal contrast rather than a sharp graphic line; on painted white or cream cabinetry it has more presence than a satin bronze but less severity than a pure matte black. The finish suits traditional and transitional kitchens, bathrooms, and built-ins where the hardware should feel aged and considered rather than industrial or high-contrast.
This pull works well for cabinet makers and installers building or refitting traditional kitchens, butler's pantries, or furniture-style vanities where the hole spacing is tight and the finish program runs dark. Designers specifying hardware for a traditional interior will find the Vinci collection useful because companion pieces in the same series carry the same profile and finish, supporting a consistent look across knobs on doors and pulls on drawers. Homeowners replacing existing hardware on cabinetry drilled to 3-1/2 inch centers can swap this pull in without picking up a drill.
Black Bronze carries a warm, layered tone with some depth and variation across the surface. Matte black is a flat, uniform finish with no warm undertone. The two read differently against wood and painted fronts.
Yes. The 3-1/2 inch (89 mm) spacing appears frequently on face-frame cabinetry and on furniture-style pieces built before the 96 mm standard became dominant, making this a useful replacement pull for older installations.
The Vinci collection includes coordinating pieces in the same design language and finish, so it supports the common practice of using knobs on doors and pulls on drawers within one hardware program.
1-1/8 inches (29 mm) from the face of the front to the back of the bar.
When the cabinetry calls for a tight center-to-center and the finish program runs warm and dark, the Vinci pull in Black Bronze is a direct answer without compromise on style or fit.