Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Schaub Vinci pull is a traditional bar pull that mounts on 8 inch (203 mm) centers, a spacing sized for wide base drawers, full-height pantry doors, and furniture-scale cabinet fronts where a smaller pull would look undersized.
An 8 inch center-to-center is one of the wider standard spacings in cabinet hardware, and that reach is intentional. Wide base drawers, five-piece door fronts, and furniture-style islands built with deep proportions all benefit from a pull that matches the visual weight of the front rather than sitting lost in the middle of it. This spacing also suits pantry units and full-overlay doors where a shorter pull would read as too small for the run of the door. If the cabinetry is built to a substantial scale, the hardware should be too.
Natural Bronze is a warm, earth-toned finish that sits closer to an aged or oil-rubbed surface than to a bright polished brass. It reads quietly against wood tones, painted fronts, and stone countertops, which makes it a practical choice in kitchens where the hardware is meant to feel like it belongs rather than announce itself. The bar profile keeps the geometry simple: a straight grip on two posts, with a 1-1/4 inch standoff from the door face that gives the fingers room to work without the pull projecting far enough to catch on clothing or nearby drawers.
Cabinet shops finishing traditional or transitional kitchens reach for this pull when the drawer bank is wide and the finish program is running warm metals. Designers specifying furniture-style islands or butler's pantries use the 8 inch spacing to keep the hardware in proportion with deep, substantial fronts. Renovation contractors replacing hardware on an existing layout where the holes are already drilled to 8 inch centers will find this a direct match without re-drilling. The Vinci collection's consistent design language makes it straightforward to run this pull on drawers alongside a coordinating knob on the doors, both in Natural Bronze.
It is one of the standard wider spacings in cabinet hardware, found on deep base drawers, pantry units, and appliance-scale fronts. Measure between the centers of your existing holes to confirm the fit before ordering.
Natural Bronze is Schaub's own finish name. It carries a warm, earthy tone, but finish appearance varies by manufacturer and Natural Bronze should not be assumed to match an oil-rubbed bronze finish from another brand or series.
The Vinci collection includes companion knobs and other hardware in the same series, which is the reliable way to coordinate pulls on drawers with knobs on doors within one finish program.
The pull mounts on 8 inch (203 mm) centers, which is the hole-to-hole drilling distance. The overall end-to-end length is 8-5/16 inches (211 mm), slightly longer to account for the end posts.
Choose this pull when the cabinetry is wide, the finish program is running warm bronze tones, and the hardware needs to hold its own proportion against a substantial drawer or door front.