Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Schaub Haniburton appliance pull gives an appliance door a defined gripping point on both sides, which supports steady opening and closing during daily use. The back to back configuration fixes two pulls through the door, creating a solid handhold from each face. The 18 inch center-to-center layout spaces the posts for full-hand grip along wider appliance panels, which helps users move heavier doors with a more natural pull motion. Satin nickel finish provides a uniform metallic appearance on the exposed surfaces, which suits projects calling for a satin-toned decorative hardware look. The 1/4-20 thread detail sets the connection interface through the door, which allows installers to match this pull to properly tapped holes or compatible through-bolting, so the handle seats firmly and resists loosening in service.
The back to back form means this pull mounts through the appliance door, so the two sides clamp against the panel for a rigid assembly that handles repeated door cycles. The 18 inch center to center specification guides the drilling pattern, allowing installers to mark and bore two accurately spaced holes for the threaded connection. The 1/4-20 thread detail identifies the fastening standard, so the pull can be tightened consistently along the full thickness of the door for even compression. Satin nickel finish defines the visible surface, so fabricators can position the handle where light and sightlines favor a satin-metal look without harsh reflection. As a Schaub and Company Haniburton appliance pull, this part fits projects that call for a defined appliance-style grip rather than a smaller cabinet-size handle.
This Schaub Haniburton appliance pull serves doors that benefit from a grip on both faces, since the back to back structure spans the full door thickness. The 18 inch center to center sizing suits wider appliance-style fronts where a longer handle supports two-handed operation. Satin nickel finish lets the pull sit comfortably beside satin nickel handles and pulls in surrounding cabinetry, creating a consistent decorative hardware appearance. Placement based on the 18 inch mounting spread helps align this pull with proportion and sightlines on tall or wide door faces, so the handle reads as a deliberate design element instead of an undersized cabinet pull. The 1/4-20 threaded connection through the panel gives installers a known interface when planning hole locations and thickness allowances.
The specified 18 inch center to center dimension provides a fixed reference for templates or shop jigs, which helps installers repeat the same handle spacing across multiple doors in a run. Because the design is back to back, each pair of pulls seats against opposite faces, so tightening brings the components into firm contact with the door surface for consistent alignment. The 1/4-20 thread format standardizes the through-bolt connection, which enables predictable torque and grip along doors of similar construction. Satin nickel finish gives a stable, satin metal look, so alignment and straightness remain visually important and can be gauged by sight along the reflected line of the pull. Identifying the piece as a Schaub and Company Haniburton appliance pull helps project teams specify this exact BTB483-15 part number whenever they repeat the same door layout or replace an existing handle in the same series.
The Schaub Haniburton appliance pull is a back to back appliance pull, so it functions as a paired handle through the door, giving users a gripping point on both sides of the panel.
The 18 inch center to center dimension defines the distance between the two mounting points, guiding drilling and layout so the handle spans the intended width on the door face.
The BTB483-15 Haniburton appliance pull has a satin nickel finish, which provides a muted metallic appearance suited to satin nickel decorative hardware schemes.
The back to back design places pulls on both faces of the door, so the threaded connection clamps through the panel and creates a solid, balanced grip from either side.
This Schaub Haniburton appliance pull uses a 1/4-20 thread, giving installers a defined fastener interface for drilling and securing the handle through the door thickness.
The manufacturer part number is BTB483-15, which identifies this specific Haniburton satin nickel, back to back, 18 inch center to center appliance pull from Schaub and Company.
The Schaub Haniburton appliance pull BTB483-15 brings a back to back layout, 18 inch center to center span, and satin nickel finish together in one handle solution. The 1/4-20 threaded connection supports firm through-door mounting on appliance-style panels. For projects calling for a defined appliance pull rather than a smaller cabinet handle, this Schaub and Company Haniburton design offers a consistent way to equip both faces of a door with the same satin nickel gripping point.