Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Chadwood base cabinet is a 24 inch wide, 34-1/2 inch high, 24 inch deep unit that builds a standard kitchen base run with consistent sizing. The recessed panel design with oak flat panel doors creates a uniform look that matches other Chadwood pieces across a project. Door frames use mortised and tenoned construction in solid 3/4 inch oak, which forms tight joints that stay square during daily use. The flat panel plywood insert uses a three-ply panel with a rotary cut red oak veneer face, so the door presents an oak grain surface that finishes consistently with the rest of the cabinet. Solid wood hanging strips are located on the top and bottom of the cabinet, giving installers defined structural zones for fastening to wall framing. Solid wood toe kicks at 3/4 inch thick form a rigid base that supports the cabinet footprint along the floor line.
The cabinet sizing at 24 inches wide, 34-1/2 inches high, and 24 inches deep fits common base cabinet layouts, which streamlines planning around appliances and countertops. Solid wood hanging strips positioned at the top and bottom give a defined fastening path, helping installations follow consistent screw lines into studs. Concealed, self-closing hinges are used on the doors, so the doors close themselves from the last part of travel while keeping hinge hardware hidden from the exterior. Oak flat panel doors match the recessed panel style and present an oak face that ties in with the rest of the Chadwood line. Solid wood toe kicks at 3/4 inch thickness create a structural front base that carries vertical loads along the lower edge of the cabinet.
This Kitchen Kompact oak cabinet is sized at 24 inches wide, so it functions as a base unit within standard modular kitchen layouts. The 34-1/2 inch height works under common countertop heights, which keeps finished surfaces level across multiple bases in a run. The 24 inch depth aligns with typical countertop depths and adjacent base cabinets, supporting continuous tops without overhang gaps. Oak flat panel doors in a recessed panel design give a consistent Chadwood look across a kitchen, tying this base cabinet visually to other units with the same style. The rotary cut red oak veneer face on the door panels maintains an oak appearance that coordinates with other red oak-faced components around the room.
Door frames use mortised and tenoned construction in solid 3/4 inch oak, creating joints that hold their position while cabinets are handled, set, and fastened, which supports accurate door reveals after alignment. Solid wood corner blocks that are glued and power nailed reinforce corners, so the cabinet body maintains squareness when shimming and leveling under countertop weight. Plywood drawers are standard, which gives drawer boxes a rigid structure for everyday loading. The front to back epoxy-coated drawer system is securely attached to a solid wood strip in the back of the cabinet, helping the slides remain anchored as drawers cycle open and closed. Drawers are equipped with a ball bearing operated nylon roller system, which guides drawers along a repeated path for smooth travel. Adjustable shelves let interior configurations change without altering fixed cabinet parts, supporting varied storage setups during or after installation. The 4 step finishing process of stain, sealer, sanding, and catalyzed top coat establishes a factory-applied finish system that prepares surfaces before the cabinet is brought onto the job site.
The CW24B Chadwood base cabinet measures 24 inches wide, 34-1/2 inches high, and 24 inches deep, which matches common base cabinet dimensions for aligning with countertops and adjacent units.
The cabinet uses solid 3/4 inch oak door frames with mortised and tenoned construction and a flat panel plywood insert with a rotary cut red oak veneer face for a consistent oak appearance.
Adjustable shelves in this cabinet can be repositioned, allowing the interior spacing to be tailored to different stored items without altering the cabinet box.
The Chadwood base cabinet uses concealed, self-closing hinges, so the door hardware stays hidden while the doors complete closing on their own near the end of travel.
This cabinet has plywood drawers with a front to back epoxy-coated drawer system securely attached to a solid wood strip, and drawers ride on a ball bearing operated nylon roller system.
The cabinet receives a 4 step process of stain, sealer, sanding, and a catalyzed top coat, creating a factory-applied finish system on the oak surfaces.
The Kitchen Kompact Chadwood base cabinet in this CW24B size provides a 24 inch wide, 34-1/2 inch high, 24 inch deep unit ready to integrate into standard kitchen layouts. Mortised and tenoned solid 3/4 inch oak frames, oak flat panel doors, and solid wood toe kicks give this base cabinet a defined structural and visual role in a Chadwood kitchen. Adjustable shelves, plywood drawers, and the ball bearing operated nylon roller drawer system support everyday use once the run is built out. Use this recessed panel Kitchen Kompact Chadwood base cabinet wherever a 24 inch bay is planned in a continuous base line.
Sold In: 1 Each