Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Chadwood wall cabinet gives you a 9W x 30H x 12D wall cabinet layout that fits narrow upper runs where a slim storage cabinet is needed. The recessed panel Chadwood door style delivers a flat panel look that matches other Chadwood units in a run. The manufacturer part CW9W identifies this specific 9-inch-wide wall cabinet when ordering or pairing with other cabinets. The door frames use mortised and tenoned construction of solid 3/4 oak, creating a rigid frame that stays square during hanging and everyday use. Flat panel plywood inserts use a three-ply panel with a rotary cut red oak veneer face, so the door panel surface visually matches the oak frame. Solid wood corner blocks are glued and power nailed, tying cabinet sides together so the box stays rigid when lifted, aligned, and fastened on the wall.
This Kitchen Kompact wall cabinet uses solid wood hanging strips located on the top and bottom, which creates clear fastening zones when tying the 9W x 30H x 12D cabinet into studs or a ledger. Solid wood corner blocks that are glued and power nailed keep the box square while you clamp adjacent units, so face frames line up across a run. The mortised and tenoned construction of the 3/4 inch solid oak door frame helps the door stay stable on its concealed, self-closing hinges as you tweak overlay and reveal. The three-ply flat panel plywood insert with rotary cut red oak veneer face keeps the recessed panel flat while you adjust hinges, so the door continues to sit correctly against neighboring fronts.
The Kitchen Kompact Chadwood wall cabinet in the 9W x 30H x 12D size works in narrow wall spaces, end-of-run fills, or alongside wider Chadwood wall units in a kitchen layout. The recessed panel oak flat panel doors align visually with other Chadwood pieces that share the same door style, helping create a continuous upper run. Solid wood hanging strips at the top and bottom of the cabinet give installers defined areas to fasten into wall framing or a mounting rail along the entire cabinet width. Solid wood corner blocks, glued and power nailed, tie the cabinet sides to the front, helping the cabinet stay square when leveling and when clamping it to neighboring wall cabinets during installation.
The mortised and tenoned construction of the solid 3/4 oak door frames locks rail and stile joints, so hinge screws pull into solid wood and the door holds alignment after repeated openings. The flat panel plywood insert, built as a three-ply panel with a rotary cut red oak veneer face, provides a stable recessed panel surface that resists telegraphing irregularities when you fine-tune hinge adjustment. The cabinet receives a four step process of stain, sealer, sanding, and catalyzed top coat, so the oak surfaces are factory finished and ready to go into the kitchen layout without additional finishing steps on site. Adjustable shelves inside the cabinet let installers set shelf positions after mounting, tailoring interior spacing to glassware, spices, or other stored items without modifying the cabinet. Concealed, self-closing hinges support a clean exterior look while assisting the door back to the face frame, which helps maintain consistent reveals between this 9W Chadwood cabinet and adjacent units in the run.
The Kitchen Kompact Chadwood wall cabinet is a 9W x 30H x 12D unit, giving a narrow upper cabinet footprint that fits tight wall spaces or fill positions in a kitchen run.
The Chadwood CW9W door frame uses mortised and tenoned construction of solid 3/4 oak, creating a strong joint that supports hinge loading and helps the door stay square during regular use.
The recessed panel uses a three-ply flat panel plywood insert with a rotary cut red oak veneer face, providing a stable panel with an oak grain surface that matches the frame.
Solid wood hanging strips located on the top and bottom of the cabinet provide defined structural areas for fasteners, supporting secure attachment to wall framing along the cabinet width.
The cabinet receives a four step process of stain, sealer, sanding, and catalyzed top coat, creating a factory-finished oak surface ready for installation in the kitchen layout.
The Kitchen Kompact Chadwood wall cabinet uses concealed, self-closing hinges, which hide hinge hardware from view and help the door return reliably to the cabinet face.
The Kitchen Kompact Chadwood wall cabinet CW9W pairs a 9W x 30H x 12D footprint with solid 3/4 oak mortised and tenoned door frames, three-ply flat panel plywood inserts, and solid wood corner blocks for a rigid, narrow wall unit. Solid wood hanging strips at the top and bottom support straightforward fastening into wall framing, while adjustable shelves and concealed, self-closing hinges let you fine-tune the interior and door operation after mounting. Select this Chadwood 9W wall cabinet when your layout needs a slim, recessed panel oak unit that installs as part of a coordinated Kitchen Kompact run.
Sold In: 1 Each