Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Chadwood vanity sink base is a 48 inch wide, 30-1/2 inch high, 21 inch deep vanity sink cabinet that provides a sized opening for a sink while keeping consistent case dimensions for layout. The door frames use mortised and tenoned construction of solid 3/4 inch oak, which creates tight, locked joints that help the doors stay square when the cabinet is in daily use. A flat panel plywood insert with a three-ply panel and a rotary cut red oak veneer face provides a stable center panel that accepts stain consistently across the door surface. Solid wood corner blocks are glued and power nailed, tying the cabinet corners together so the case resists racking during handling and installation. Solid wood hanging strips located on the top and bottom give defined fastening areas, which support a solid connection to wall framing or cleats.
This Chadwood vanity sink base has solid wood hanging strips located on the top and bottom, so the installer has continuous solid material to fasten through when anchoring the cabinet to wall framing. The 48 inch width, 30-1/2 inch height, and 21 inch depth define the footprint, which aids layout against side walls and adjoining cabinets before scribing fillers. Solid wood corner blocks that are glued and power nailed help the case stay square as the cabinet is leveled and shimmed. Door frames built from mortised and tenoned solid 3/4 inch oak keep the door openings consistent, which supports accurate alignment of door gaps during hinge adjustment. Adjustable shelves give flexibility to position storage clear of plumbing without altering the fixed case.
The Kitchen Kompact 48 inch wide Chadwood vanity sink base fits bath layouts that call for a centered sink within a recessed panel cabinet look. The 30-1/2 inch height keeps the top line consistent with standard vanity tops, which matters when tying into side splashes or wall tile. At 21 inches deep, the cabinet maintains a typical bath depth, leaving floor space in front while still providing room for plumbing behind doors. Oak flat panel doors on this CWV48S unit present a recessed panel appearance that coordinates with other Kitchen Kompact Chadwood pieces in the same style class. A flat panel plywood insert with a rotary cut red oak veneer face continues the oak grain through the center panel, helping the doors visually match face frames and rails.
Door frames using mortised and tenoned construction of solid 3/4 inch oak provide a mechanical joint that resists twisting, which supports repeatable door alignment on multiple CWV48S installs in a project. Solid wood corner blocks that are glued and power nailed strengthen the cabinet corners, so the case tolerates jobsite handling and minor shifting as shims are added under the base. Solid wood hanging strips at the top and bottom offer predictable fastening lines, which lets an installer use the same fastening pattern from unit to unit. Adjustable shelves create flexibility after rough plumbing is set, allowing shelf height changes instead of modifying the fixed cabinet box. A 4 step process of stain, sealer, sanding and catalyzed top coat is applied to the oak, giving a finished surface that supports a consistent appearance across multiple Chadwood vanity sink base cabinets on the same job. Concealed, self-closing hinges keep the hardware out of sight when doors are shut and draw doors closed, which presents a clean face to the room while helping doors return to a closed position after access.
The CWV48S Chadwood vanity sink base measures 48 inches wide, 30-1/2 inches high, and 21 inches deep, which sets the footprint for planning bath layouts and aligning adjoining cabinets.
The Chadwood vanity sink base door frames use mortised and tenoned construction of solid 3/4 inch oak, creating strong joints that help doors stay square and operate smoothly over time.
The vanity sink base doors use a flat panel plywood insert with a three-ply panel and rotary cut red oak veneer face, giving a stable recessed panel with a matching oak grain appearance.
The vanity sink base uses solid wood hanging strips located on the top and bottom, providing continuous solid material for fastening the cabinet securely to wall framing.
The Chadwood vanity sink base receives a 4 step process of stain, sealer, sanding and catalyzed top coat, producing a finished surface suited to regular use in a bath setting.
The CWV48S vanity sink base uses concealed, self-closing hinges, which keep hardware hidden when doors are closed and draw the doors shut after use.
The Kitchen Kompact Chadwood vanity sink base CWV48S combines a 48 inch width, 30-1/2 inch height and 21 inch depth with mortised and tenoned solid 3/4 inch oak door frames, solid wood corner blocks, and solid wood hanging strips. These details give a defined footprint, strong case support, and predictable fastening points when planning a bathroom vanity run. The flat panel plywood insert with rotary cut red oak veneer face and the 4 step stain, sealer, sanding and catalyzed top coat process align the appearance with other Chadwood cabinets. For projects built around this size and style, this vanity sink base offers a consistent cabinet unit to incorporate into the layout.
Sold In: 1 Each