Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rev-A-Shelf trash pull-out gives a cabinet a dedicated place for waste handling with a fully assembled bottom-mount design. This Rev-A-Shelf bottom mount waste pullout includes one 35 quart white bin and uses a white carriage for a clean, simple look inside the cabinet. The unit is part of the RV Series, which Rev-A-Shelf describes as its most affordable line of trash pull-outs. It installs with four screws, helping speed up setup for both shop work and field installation. This garbage pullout uses full extension slides, so the waste basket moves out for better reach. Buyers comparing revashelf wastebaskets or a cabinet garbage pull out should also note the stated minimum cabinet opening: 11 inches for face frame cabinets and 9.65 inches for frameless cabinets.
Key specs to confirm: This bottom mount waste pullout is identified as a 10-15/32 inch white unit with one 35 quart white bin and full extension slide travel. Rev-A-Shelf lists the minimum cabinet opening as 11 inches for face frame cabinets and 9.65 inches for frameless cabinets. Before purchase, confirm your actual cabinet opening, interior depth, and clear floor area for the pull-out frame and bin. Also confirm whether your project needs a door mount kit, because door mount kits are sold separately. If you need lid use, verify whether a lid is included with your selected bin configuration, since lids can be purchased separately. Load, compliance, and other technical details are not provided here and should be confirmed with the manufacturer or technical documentation.
What's included: One fully assembled Rev-A-Shelf bottom mount waste pullout and one 35 quart white bin are verified as included.
What to verify before ordering: Check cabinet type, minimum opening width, interior depth, slide clearance, and whether you want a separate door mount kit or lid. Also confirm that a single-bin layout fits your waste handling needs.
A garbage pullout like this is typically chosen when a buyer wants to move a freestanding trash can off the floor and into a base cabinet. In a kitchen, bath, utility room, or break area cabinet, the main goal is cleaner access and a more controlled use of interior space. This Rev-A-Shelf trash pull-out is built as a bottom-mounted unit, so it installs on the cabinet floor rather than hanging from side walls. That can be helpful when the installer wants a direct mounting method with fewer cabinet-side constraints to manage.
The included 35 quart white bin gives the buyer a known single-bin format. That matters when the cabinet opening is limited or when the project calls for one waste basket instead of a split recycle layout. Full extension slide travel helps bring the bin farther out of the cabinet, which can improve reach when scraping plates, clearing prep waste, or changing liners. Because the unit comes fully assembled and installs with four screws, it can also save setup time compared with products that require more frame assembly before fitting.
For remodel work, fit is the main issue to confirm. Rev-A-Shelf provides a minimum opening of 11 inches for face frame cabinets and 9.65 inches for frameless cabinets. Buyers should still measure the real opening and interior depth, because cabinet construction, hinge placement, and obstructions can affect usable space. If you want the cabinet door attached to the pull-out for one-motion access, note that door mount kits are sold separately. If odor control or covered storage matters, check lid availability separately as well. For buyers searching revashelf wastebaskets, a trash can pullout, or a cabinet garbage pull-out, these details are often the difference between a smooth install and a return.
When comparing a bottom mount waste pullout, buyers usually focus on assembly level, slide travel, included bin count, and cabinet opening requirements. This Rev-A-Shelf unit is clearly positioned around straightforward installation and practical cabinet fit. The product is fully assembled, uses full extension slides, and includes one 35 quart white bin. Those are useful checkpoints because they describe what the buyer receives and how the unit operates without relying on assumptions.
Another point of comparison is whether a pull-out is sold as a complete working set or as a frame that needs additional parts. Here, the included bin is verified, while replacement bins and door mount kits are sold separately. That gives buyers flexibility, but it also means the order should match the intended cabinet setup. If the project requires the cabinet door to move with the frame, the separate door mount kit should be reviewed before ordering.
Series identity can matter too. Rev-A-Shelf states that the RV Series is its most affordable line of trash pull-outs. For a buyer, that helps place the product within the brand's lineup while keeping expectations centered on fit, included parts, and installation style. Compared with generic cabinet wastebaskets, a defined brand and product family can make future replacement-bin matching easier. The key is to compare verified dimensions, cabinet type, and included components rather than relying on appearance alone.
This Rev-A-Shelf trash pull-out requires a minimum 11 inch cabinet opening for face frame applications. Measure the actual clear opening before ordering.
This bottom mount waste pullout requires a minimum 9.65 inch opening for frameless cabinets. Confirm interior clearance and depth before installation.
This garbage pullout includes one 35 quart white bin. It is a single-bin cabinet waste setup.
This trash can pullout comes fully assembled. That helps reduce setup time before mounting it in the cabinet.
This rev a shelf unit installs with four screws as a bottom-mounted cabinet pull-out. Follow manufacturer installation guidance and local building requirements where applicable.
This waste basket does not include a door mount kit based on the verified description. Door mount kits are sold separately.
This revashelf wastebaskets listing does not verify an included lid. Lids can be purchased separately, so confirm your preferred configuration before ordering.
This garbage pull out is described with full extension slides. The series description also references slide designs used across the RV line.
This garbage pull-out should be checked for cabinet opening width, interior depth, floor clearance, and any door or hinge interference.
rev a shelf buyers usually want clear fit details and included parts before they place an order. This cabinet trash pull-out includes one 35 quart white bin, a white carriage, full extension operation, and a fully assembled frame that installs with four screws. Before purchase, confirm whether your cabinet is face frame or frameless, verify the opening width, and decide if you also need a separate door mount kit or lid. Those checks help match the pull-out to the cabinet the first time.
Sold In: 1 Each
