
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Rev-A-Shelf trash pull-out gives you a cabinet-mounted way to store one 50 quart waste bin inside a base cabinet. This bottom mount waste pullout from Rev-A-Shelf Corporation is part of the RV Series, which the manufacturer describes as its most affordable line of trash pull-outs. The unit comes fully assembled and installs with four screws, which can help speed up cabinet prep for installers and serious DIY buyers. This garbage pullout includes one white 50 quart bin and a lid, and it uses 3/4 extension slides. Buyers comparing wastebaskets, a garbage pull out, or a garbage pull-out for kitchen cabinets should note the listed width of 10-15/32 inches and the published minimum cabinet opening guidance for face frame and frameless applications.
Key specs to confirm: This Rev-A-Shelf waste basket pull-out is listed at 10-15/32 inches wide and includes one 50 quart white bin with lid. The manufacturer states a minimum cabinet opening of 11 inches for face frame cabinets and 9.65 inches for frameless cabinets. Buyers should also confirm that a bottom mount installation works with the cabinet floor condition, interior depth, door style, and any hinge or obstruction inside the opening. The slide type is listed as 3/4 extension. Load rating, full dimensional drawing, and any compliance or safety details are not provided here and should be confirmed with the manufacturer or technical documentation.
What's included: One fully assembled Rev-A-Shelf bottom mount waste pullout, one 50 quart white bin, and one lid. Replacement bins and door mount kits are sold separately.
What to verify before ordering: Confirm cabinet opening type, opening width, interior depth, cabinet floor condition, and whether you need a separate door mount kit. Check that a single-bin 50 quart layout matches your trash sorting needs.
A single-bin trash can pullout like this is often chosen when the goal is to move a freestanding trash can off the floor and into the cabinet. In a kitchen remodel, that can free up aisle space and keep the waste basket out of sight while still making it easy to reach. Because this Rev-A-Shelf trash pull-out is a bottom mount unit, it is aimed at cabinet interiors where the installer wants the assembly supported from the cabinet floor rather than side walls.
This can be useful in older cabinets where side conditions vary or where a straightforward install matters. The manufacturer states that the pull-out comes fully assembled and installs with four screws. For tradespeople, that can simplify jobsite handling. For serious DIY buyers, it means less time sorting separate frame parts before fitting the unit.
The included one 50 quart white bin fits buyers who want one larger waste container instead of a split recycling layout. If you are replacing basic wastebaskets under the sink or in a base cabinet, this size may suit general household trash where one container is enough. If you need multiple streams for trash and recycling, you should confirm whether a different cabinet trash pull-out format would better match that use.
The RV Series is described by Rev-A-Shelf as its most affordable line of trash pull-outs. That makes this kind of garbage pullout a practical choice when the priority is cabinet organization with a known brand and a simpler hardware package. The listed 3/4 extension slides mean the bin pulls forward for access, but buyers who want a different slide travel should verify that this extension style matches how they use the cabinet day to day.
Fit is the main point to confirm before purchase. The product page data gives a minimum cabinet opening of 11 inches for face frame cabinets and 9.65 inches for frameless cabinets. The product width is listed at 10-15/32 inches. Buyers should still confirm interior depth, door clearance, and any hinge or plumbing interference if the cabinet is near a sink base or other obstacle. If you want the cabinet door attached to the pull-out, note that door mount kits are sold separately.
When buyers compare one bottom mount waste pullout to another, the first differences usually come down to mounting style, extension type, included accessories, and how much setup is required. This Rev-A-Shelf waste basket unit is clearly identified as a bottom mount model, includes one 50 quart white bin, includes a lid, and arrives fully assembled. Those are useful checkpoints because they affect both installation time and what else needs to be ordered.
Some cabinet trash pull-out products require more on-site assembly or separate accessory selection. Here, the included bin and lid reduce guesswork for buyers who want a complete single-bin setup from the start. At the same time, Rev-A-Shelf notes that replacement bins and door mount kits are sold separately, which is important if your install plan includes attaching the cabinet door or planning for future bin replacement.
The 3/4 extension slide format is another practical comparison point. For many kitchens, that travel is enough for daily trash access. Buyers who are comparing a garbage pull out for heavy use should focus on whether the extension style, cabinet opening width, and cabinet interior layout fit the intended application. Because detailed load and full dimensional data are not included here, those points should be checked in technical documentation before final purchase.
Brand consistency also matters when matching cabinet accessories across a project. Rev-A-Shelf is the listed brand, and the RV Series description gives buyers a clear place for this product within that brand's trash pull-out offering. For installers and purchasing teams, that helps when standardizing parts across multiple cabinets or repeat jobs. The main buying decision remains simple: confirm the cabinet opening, confirm that one 50 quart bin is the right capacity, and confirm whether any separate door-mount hardware is needed.
This Rev-A-Shelf trash pull-out lists an 11 inch minimum cabinet opening for face frame cabinets. Confirm actual clear opening and interior depth before ordering.
This bottom mount waste pullout lists a 9.65 inch minimum cabinet opening for frameless cabinets. Confirm clear width and any interior obstructions.
This Rev-A-Shelf waste basket includes one 50 quart white bin with a lid.
This garbage pullout is listed as fully assembled and installs with four screws.
This trash can pullout includes a lid with the bin according to the verified product description.
This Rev-A-Shelf unit may require a separate door mount kit because door mount kits are sold separately. Confirm your install method before ordering.
This bottom mount waste pullout uses 3/4 extension slides.
This garbage pull-out should be checked for interior depth, cabinet floor condition, hinge clearance, and door swing. Follow manufacturer installation guidance and local building requirements where applicable.
Rev-A-Shelf waste basket buyers should confirm cabinet opening, mounting style, and included parts before purchase. This model gives you a fully assembled bottom mount waste pullout with one 50 quart white bin and lid, plus published minimum opening guidance for face frame and frameless cabinets. Before ordering, verify interior depth, door clearance, and whether you also need a separate door mount kit or future replacement bin. A quick fit check helps make sure this garbage pullout matches the cabinet and the job.
Sold In: 1 Each