Power cord grommets round plastic with 2 electrical outlets and 1 phone-data jack provide a compact desktop power and communication system that brings power and data connections right to the work surface, so users access plugs without reaching under cabinets or desks. The unit is stocked in black, so the visible trim matches dark laminate or painted tops commonly used in office, shop, or reception counters. A 6 foot power cord extends from the module, so the installer routes a single cord to a surge suppressor instead of cutting multiple openings for outlets. The overall diameter of the unit is 4-1/4 inches, which defines the visible footprint on the surface and helps with layout around other hardware. The unit depth of 5-1/4 inches sets the clearance requirement below the surface, which matters where drawers, structural rails, or storage components are nearby.
The required 3-1/2 inch diameter cut out defines the drilling operation, so installers select a hole saw or boring bit that matches this size for a snug fit in the surface. The 5-1/4 inch overall depth sets the under-surface envelope, so cabinet makers plan drawer box heights and cross rails to clear the body of the module. The 6 foot power cord is attached to the desktop power and communication system, so the entire unit connects back to a surge suppressor without hardwiring, simplifying layout around existing outlets. The removable cap resting on legs above the flange keeps the opening covered while still allowing wires to pass through, so cables feed devices cleanly without leaving a large exposed hole in the work surface.
The desktop power and communication system design suits desks, counters, and worktops where users need power and data connections right at their fingertips, so the module serves as a central point for plugging in equipment. The overall 4-1/4 inch diameter of the unit is compact enough for narrow tops yet large enough to house 2 electrical outlets and 1 phone-data module, so it balances capacity with space constraints on crowded work surfaces. Its black finish coordinates with many commercial and shop environments, so the visible flange and cap sit cleanly against dark laminates, painted MDF, or solid surface inserts. Because the unit places power and data in a single opening, it suits multimedia stations, computer work areas, and technical benches that benefit from combined electrical and network terminations.
The specified 3-1/2 inch diameter cut out and 4-1/4 inch overall diameter give clear sizing references, so fabricators can lay out and machine tops before finishing, reducing rework from misaligned openings. The 5-1/4 inch depth requirement indicates how much vertical space the module occupies, so designers coordinate cabinet interiors, shelves, and structural members to avoid conflicts once the unit is dropped into place. The dual CAT 5 RJ45 universal T568A-B jacks within the phone-data module standardize terminations, so low-voltage installers can follow familiar wiring patterns and expect consistent connectivity across different projects. The integrated circuit breaker reset button at the base localizes overload response, so users restore service quickly at the work surface rather than tracing circuits elsewhere in the building. The removable cap sitting on legs above the flange allows cords to pass while still covering the opening, so installations maintain a finished appearance even when several devices remain plugged in for daily use.
The PCS1A-90 power cord grommet has an overall diameter of 4-1/4 inches and a depth of 5-1/4 inches, which defines the footprint on the work surface and the clearance space below.
This desktop power and communication system requires a 3-1/2 inch diameter cut out, so drilling or boring operations can be planned around this exact opening size in the surface material.
The Doug Mockett power data grommet provides 2 electrical outlets on the unit, giving two standard power connection points directly at the desktop work area.
The PCS1A-90 provides one phone-data module with dual CAT 5 RJ45 universal T568A-B jacks, allowing two network or phone terminations within the same desktop opening.
The power comm grommet features a 6 foot power cord that plugs into a surge suppressor, allowing the module to reach a nearby outlet from the work surface.
This UL listed power grommet has a circuit breaker reset button on the base, supplying built-in overload protection that can be reset directly at the unit.
The Doug Mockett and Company PCS1A-90 power-comm grommet from Wurth Baer Supply combines 2 electrical outlets and a phone-data jack in a single round plastic module, so desktops gain organized power and communications access. The 3-1/2 inch cut out and 4-1/4 inch overall diameter give clear machining targets, so fabricators integrate the unit cleanly into new or existing tops. With a 6 foot power cord designed to plug into a surge suppressor and a circuit breaker reset button on the base, the unit concentrates power distribution and protection at the work surface for efficient workstation layouts.