Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Power data grommet black describes this Doug Mockett and Company PCS3-90 unit designed to bring electrical and communication connections to a work surface cutout. The oval housing measures 12-3/4 inches long by 4-5/16 inches wide, so it spans a generous area on a countertop, desk, or bench while keeping the footprint clearly defined for layout. The matte black finish gives the grommet a low-glare appearance that blends into many commercial or shop environments where a subdued look is preferred. A 6 foot power cord extends from the unit, allowing the installer to route it to a surge suppressor without adding an immediate extension, which simplifies placement under the work surface. The built-in cover cap closes over the opening when the outlets and data ports are not in use, helping the surface read as a single, finished component instead of a busy cluster of individual devices.
The PCS3-90 oval power/data grommet is designed around a 12 inch long by 3-1/2 inch wide cutout, so installers can base their fabrication directly on these numbers to achieve a snug fit in wood, laminate, or similar tops. The overall body dimensions of 12-3/4 inches by 4-5/16 inches by 4-3/4 inches deep provide clear height and width references, which helps when checking for interference with support rails or under-structure framing. A 6 foot power cord extends from the unit, so the grommet can be positioned on the surface while the cord is routed back toward a surge suppressor placement. The UL listed designation applies to the power/communication grommet, which gives a documented rating for electrical use in appropriate commercial or shop environments where listed components are specified.
The PCS3-90 oval power/data grommet from Doug Mockett and Company is built for work surfaces that need both power and communication access in one opening. Its four electrical outlets concentrate power at a single reachable point, which works well on desks where multiple monitors, chargers, or small tools stay plugged in. The three interchangeable phone/data modules bring structured cabling to the same spot, so Cat 5 RJ45 or F connector lines terminate neatly at the top side instead of hanging loose underneath. Dual Cat 5 RJ45 universal T568A/B jacks and dual Cat 5 RJ45 T568A wired jacks support gigabit ethernet, giving network drops performance capacity suitable for modern data needs at the user location. The single F connector insert provides a coax connection, useful where television or other RF signal is required at the work area. Together, these connections allow the grommet to serve as a small, organized hub directly in the surface.
The integrated circuit breaker reset button on the base gives the PCS3-90 a local reset point, so power to the four outlets can be restored at the unit after a trip without changing the surface layout, which keeps downtime short at that location. UL listing provides a recognized evaluation for the combination of power and communication components, supporting use in environments where listed assemblies are specified in project documentation. The combination of dual Cat 5 RJ45 universal T568A/B jacks and dual Cat 5 RJ45 T568A wired jacks, supporting gigabit ethernet, helps maintain network performance all the way to the desk or table connection, which is important when workstations rely on high-speed data. The single F connector insert keeps coax terminations fixed in the same housing, which reduces the chance of loose dangling cables at the edge of the surface. The matte black finish and low-profile cover cap allow the unit to sit visibly yet unobtrusively, keeping the work area organized when ports are idle while still leaving everything ready for the next connection.
The PCS3-90 power/communication grommet requires a 12 inch long by 3-1/2 inch wide cutout, which lets fabricators size the opening precisely before dropping the unit into the work surface.
The PCS3-90 grommet provides four electrical outlets, giving users several power points at the work surface so multiple devices, chargers, or small tools can remain plugged in together.
The PCS3-90 has three interchangeable phone/data modules, including dual Cat 5 RJ45 universal T568A/B jacks, a single F connector insert, and dual Cat 5 RJ45 T568A wired jacks that support gigabit ethernet.
The PCS3-90 power/communication grommet has a 6 foot power cord, allowing the installer to route the cord to a surge suppressor placed away from the immediate leg or foot area.
The PCS3-90 power/communication grommet is UL listed, which indicates it has been evaluated to a recognized standard for electrical use in suitable commercial or shop environments.
The PCS3-90 has overall dimensions of 12-3/4 inches long by 4-5/16 inches wide by 4-3/4 inches deep, which helps when verifying clearance above and below the work surface.
The Doug Mockett and Company PCS3-90 oval power/data grommet offers four electrical outlets and three interchangeable phone/data modules in a single matte black housing. With a defined 12 inch by 3-1/2 inch cutout requirement and 12-3/4 inch by 4-5/16 inch overall size, it fits planned locations on desks, counters, or tables where organized power and network access are needed together. The UL listed rating, integrated circuit breaker reset button, and 6 foot power cord support practical installation and day-to-day use. For projects calling for a clean, centralized power and data hub at the work surface, this PCS3-90 unit aligns the electrical and communication connections into one managed opening.