Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Inspirations cabinet knob gives a clean, classic look in a casual relaxed style, so cabinet doors and drawers get a consistent appearance across a project. The round 1-5/16 inch (33 mm) diameter face provides a comfortable pull point, which helps doors open smoothly without fingers slipping off small edges. The knob projects 1 inch (25 mm) from the surface, giving hand clearance while staying tight to the front so clothing is less likely to catch. A base diameter of 3/4 inch (19 mm) spreads the load at the mounting hole, which supports stable mounting on typical cabinet door and drawer fronts. The knob is part of the Inspirations collection, which keeps the visual style aligned when using multiple pieces on the same installation. This Allison by Amerock design gives installers a straightforward option when a simple round profile is preferred.
This 1-5/16 inch cabinet knob is designed around a single center mounting point, which suits standard cabinet door and drawer layouts that rely on one hole per knob. The knob uses an 8-32 threaded connection, aligning with common cabinet hardware tapping and tools used in shop or on-site work. An 8-32 x 1 inch screw length specification indicates the knob is intended for typical door and drawer front thicknesses where that length is commonly applied. With a 1 inch projection and centered mount, the knob sits straight out from the surface, which helps keep visual alignment consistent when multiple units are installed in rows or grids. The round design allows orientation to be set without worrying about rotational alignment, which can streamline installation on large cabinet runs.
The BP1586WN weathered nickel knob, with its 1-5/16 inch (33 mm) diameter, suits cabinet doors and drawers that benefit from a full fingertip and partial hand grip, which is useful on kitchen, bath, or shop storage fronts that see frequent operation. Its weathered nickel finish delivers a subdued, classic look, which helps it coordinate with decors that favor softer metal tones rather than bright polish. Being part of the Inspirations collection, the design stays consistent when multiple knobs are used throughout a room, which helps installers deliver a uniform visual line on banks of cabinets. The 3/4 inch (19 mm) base diameter covers the area around the mounting hole, which is helpful on painted or stained fronts where a neat transition between knob and surface is important.
The zinc die-cast material of this Allison by Amerock knob provides a predictable weight and feel, which allows installers to anticipate how the hardware will handle during repetitive mounting work. The 1 inch (25 mm) projection establishes a fixed stand-off from the surface, which simplifies layout planning when checking clearances near adjacent doors, drawers, or walls. Its single 8-32 threaded mounting interface matches a common thread size, which lets installers rely on familiar drilling and fastening routines across cabinet runs. Because the knob face is perfectly round, there is no need to align a pattern or edge, which speeds up installation and reduces callbacks related to crooked hardware. Using one consistent 1-5/16 inch diameter profile across a project helps keep drilling jigs and measurements the same from cabinet to cabinet, which supports faster, more repeatable workflows.
The Amerock Inspirations cabinet knob has a 1-5/16 inch (33 mm) diameter, a 1 inch (25 mm) projection, and a 3/4 inch (19 mm) base diameter, so its footprint and stand-off are easy to plan on cabinet fronts.
The BP1586WN weathered nickel knob is zinc die-cast, providing a solid metal body that gives a consistent feel and weight on doors and drawers across a project.
This Allison by Amerock knob uses a weathered nickel finish, giving a muted metallic appearance that supports classic or casual decor without a highly reflective surface.
The cabinet knob uses an 8-32 x 1 inch screw size, aligning with common cabinet hardware drilling and fastening practices on standard door and drawer front thicknesses.
This Amerock knob projects 1 inch (25 mm) from the cabinet surface, placing the grip slightly off the face so hands clear the door or drawer while keeping the hardware compact.
The Inspirations collection knob offers clean, classic lines in a casual relaxed style, giving cabinets a straightforward look that works with a wide range of decor choices.
The Amerock Inspirations cabinet knob in weathered nickel brings a 1-5/16 inch diameter face, 1 inch projection, and zinc die-cast construction together in one straightforward part, which supports repeatable layouts. Using the BP1586WN weathered nickel knob across a run keeps grip size, stand-off, and finish consistent from door to drawer. For projects that call for clean, classic lines in a casual relaxed style, this Allison by Amerock knob offers a simple, well-defined option ready to integrate into cabinet work.
Sold In: 1 Each
