Inspirations Pull 3 In Center To Center Details

The Inspirations pull 3 in center to center from Allison by Amerock is a zinc die-cast handle in a weathered nickel finish, so it delivers a stable grip with a muted metallic look that fits casual cabinet layouts. The 3 in (76 mm) center-to-center dimension sets precise hole spacing between mounting points, which matches common cabinet and drawer drilling patterns for straightforward handle updates. A total length of 5-5/8 in gives the pull enough span for comfortable hand clearance across standard drawer faces. The 1 in projection moves the grip out from the cabinet front, providing finger room while keeping the handle close to the surface for a tidy profile on doors and drawers. At 11/16 in width, the pull presents a slim front face that sits neatly on narrow rails or stile frames without crowding adjacent hardware runs.

Key Amerock Inspirations Pull Job Advantages

• The 3 in (76 mm) center-to-center drilling dimension aligns with widely used cabinet boring setups, which simplifies layout when matching existing holes on retrofit projects or repeating a pattern across multiple cabinet runs.
• The weathered nickel finish gives the zinc die-cast pull a softened metallic tone, which helps it blend into relaxed décor schemes where a low-glare surface supports a more understated cabinet appearance.
• The 5-5/8 in overall length spans a good portion of typical drawer fronts, which provides a substantial gripping area that suits everyday opening and closing on base cabinets, vanities, or wall units.
• The 1 in projection provides clearance between the hand and the cabinet face, which makes it easier to grasp the pull from different angles without fingers scraping against the door or drawer fronts in tight kitchen or bath layouts.
• The 11/16 in width keeps the pull profile relatively narrow, which helps it sit comfortably on slimmer frame members and allows for closer spacing on multi-drawer stacks without visually overwhelming the fronts.

Mounting And Fit Details For This Pull

This Amerock Inspirations pull uses a 3 in (76 mm) center-to-center mounting layout, so the two attachment points align with a standard distance that matches many existing cabinet and drawer hole patterns. The handle length of 5-5/8 in means the pull overhangs each side of the drilling line, which distributes visual weight along the front of the cabinet face. With a projection of 1 in, the pull stands off the door or drawer surface just enough to give fingers a clear path behind the bar, which supports consistent gripping along the full run. The 11/16 in width helps the pull sit securely against the mounting surface while limiting the footprint, which is useful when installing on narrower rails where space is limited between neighboring fronts.

Using The Amerock Inspirations Pull In Projects

Where This Weathered Nickel Pull Works Well

The Amerock Inspirations cabinet pull, model BP1590WN, is part of the Inspirations collection, so its clean, classic lines are suited to cabinets that need a casual, relaxed style. With a 3 in (76 mm) center-to-center dimension, this pull fits layouts that follow common drilling patterns on face-frame or frameless cabinetry, which is useful in kitchens, baths, and built-ins that repeat a standard handle spacing. The 5-5/8 in length lets the pull sit comfortably across drawer fronts of various widths, giving a balanced look when lined up on base cabinets or tall storage units. Because the pull is zinc die-cast with a weathered nickel finish, it combines a solid-feeling body with a subdued metal tone that coordinates with other weathered nickel decorative hardware in the same room. The 11/16 in width and 1 in projection suit both doors and drawers where a moderate-size handle provides enough grip without dominating smaller fronts.

Why These Dimensions Support Consistent Results

The 3 in (76 mm) center-to-center spacing on this Inspirations pull defines the exact distance between screw centers, which simplifies repeated drilling or alignment when installing multiple handles along a run of cabinets. The 5-5/8 in length positions the mounting points toward the center of the pull body, spreading the visible handle evenly across the front and helping rows of pulls track in straight, consistent lines. A 1 in projection establishes a fixed offset from the door or drawer surface, so every installed pull presents the same stand-off distance, which creates a uniform profile across upper and lower cabinets. The 11/16 in width keeps the footprint tight against the mounting surface, helping installers maintain clear margins from door edges or adjacent fronts when upgrading existing layouts. As a zinc die-cast part with a weathered nickel finish, the pull maintains its defined shape and finish tone, supporting a cohesive appearance whenever multiples are used in the same installation.

Amerock BP1590WN Pull Common Buyer Questions

Choose This Pull For Centered, Repeatable Layouts

The Allison by Amerock Inspirations Series BP1590WN pull pairs a 3 in (76 mm) center-to-center layout with a 5-5/8 in overall length, giving cabinets a consistent handle rhythm across doors and drawers. Its zinc die-cast construction and weathered nickel finish support installations where a stable grip and softened metallic look are both important. With a 1 in projection and 11/16 in width, the pull balances finger clearance and a slim footprint, helping maintain clean lines on multi-unit projects. For cabinets planned around standard drilling patterns and a casual style, this Amerock Inspirations pull offers a well-defined set of dimensions that guide repeatable, organized hardware layouts.