Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rev-A-Shelf sink tip out tray gives you a slim storage option behind a sink front while keeping the installation profile compact. This self-close sink tip out tray is a white sink tip out tray from Rev-A-Shelf Corporation in the 6541 Series. The tray measures 36 inches long, 1-11/16 inches deep, and 3-15/16 inches high. Product data identifies this as a plastic sink tip out tray with no tab stop. The 36 inch sink tip out tray format is supplied with end caps so the tray can be cut down to shorter custom sizes. For buyers replacing an older sink tip out tray or planning a new sink front setup, this model is intended for applications where a slim tray depth matters and custom length adjustment may be useful.
Key specs to confirm: This sink tip out tray is listed at 36 inches long, 1-11/16 inches deep, and 3-15/16 inches high. It is a white plastic tray in the Rev-A-Shelf 6541 Series and is described as a self-close sink tip out tray with no tab stop. Before ordering, confirm the false front width, the available depth behind the sink front, the usable opening height, and whether your project needs a no tab stop design. If you are replacing an older tray, compare dimensions and tray style carefully. Any safety, compliance, or other technical details not shown here should be confirmed through manufacturer documentation.
What's included: Verified product data supports one tray and end caps for the 36 inch version. If your installation requires hinges, mounting hardware, or other accessories, confirm those items before ordering.
What to verify before ordering: Check cabinet opening size, sink and plumbing clearance, sink front construction, desired tray length after cutting, and whether your existing or planned hardware is compatible with a self-close sink tip out tray that has no tab stop.
A sink tip out tray is often selected when a buyer wants to use the false sink front for small-item storage instead of leaving that space unused. This Rev-A-Shelf tipout is built for that type of application. The slim 1-11/16 inch depth is an important detail for cabinet layouts where sink bowls, clips, or plumbing reduce available space behind the front panel. If you are working in a kitchen or bath vanity and need a plastic sink tip out tray that stays within a compact depth, this 6541 Series sink tip out tray is designed around that need.
The 36 inch sink tip out tray format also helps in jobs where one standard tray length may need to serve different cabinet widths. Verified product data states that 36 inch lengths are available with end caps so trays can be cut down to shorter custom sizes. That matters for installers who want one longer tray as a starting point and then trim it to suit the opening. If your cabinet front is narrower than 36 inches, confirm the final target size and trim method before installation.
For replacement work, the no tab stop sink tip out tray detail is one of the first things to compare. Buyers replacing an older unit should not assume every tray behaves the same way. Tray depth, height, stop style, and self-close function all affect fit and daily use. If you are matching an existing sink front setup, verify that your hinges and mounting approach are appropriate for this tray style. Product data clearly identifies the tray as self-close, white, plastic, and part of the Rev-A-Shelf 6541 Series, which helps narrow compatibility questions before you order.
This product can also suit buyers who want a clean, simple tray profile without moving to a deeper organizer. The compact dimensions make it easier to evaluate against tight cabinet conditions. When planning a new install, measure around sink hardware and plumbing first, then compare those measurements to the listed tray dimensions and the available false front area.
When comparing sink tip out tray options, the most useful differences are usually tray dimensions, tray material, stop style, and whether the tray can be adapted to cabinet width. This white sink tip out tray gives verified dimensions and a defined series identity, which helps buyers compare like for like instead of guessing from appearance alone. A clearly listed 36 inch length, 1-11/16 inch depth, and 3-15/16 inch height make this product easier to evaluate against actual cabinet conditions.
Another practical comparison point is custom sizing. Product data states that 36 inch lengths are available with end caps so trays can be cut down to shorter custom sizes. That can be useful if your jobsite dimensions vary or if you want one tray format that can be trimmed for multiple sink front widths. Buyers who do not need a full-length tray should still confirm that the finished cut size will suit the cabinet opening and installation method.
Series consistency can matter in larger cabinet programs or repeat service work. Because this tray is identified as a Rev-A-Shelf 6541 Series product, buyers can match against existing specifications more easily. The plastic tray construction and white finish also provide straightforward visual consistency for projects where the sink front accessory should stay simple and easy to identify.
Finally, compare the no tab stop design carefully. Some buyers need to replace an exact tray style, while others are selecting a new format for first-time installation. In either case, use the verified product dimensions and series details as your baseline, then confirm hardware requirements and cabinet clearance before purchase. That approach helps reduce ordering mistakes and keeps the sink tip out tray aligned with the cabinet layout you actually have.
This sink tip out tray fits only where the false front opening and behind-front clearance match the listed 36 inch, 1-11/16 inch, and 3-15/16 inch dimensions.
This Rev-A-Shelf sink tip out tray is listed with end caps on 36 inch lengths so the tray can be cut down to shorter custom sizes.
This product is identified in verified product data as a self-close sink tip out tray.
This 6541 Series sink tip out tray is described as having no tab stop.
This sink tip out tray is described by Rev-A-Shelf as a plastic tray.
This sink tip out tray requires you to measure false front width, available depth behind the panel, opening height, and clearance around the sink and plumbing.
Included hardware beyond the tray and end caps is not fully verified here, so installation components should be confirmed before ordering.
This Rev-A-Shelf sink tip out tray is in the kitchen and bath cabinet accessories category, so buyers may use it in either application if fit is correct.
This sink tip out tray should be installed by following manufacturer installation guidance and local building requirements where applicable.
Rev-A-Shelf tipout buyers should focus on fit first. This white sink tip out tray is a 36 inch long, 1-11/16 inch deep, 3-15/16 inch high plastic tray in the 6541 Series with self-close action and no tab stop. Verified data also supports end caps on the 36 inch version so the tray can be cut to shorter custom sizes. Before purchase, confirm cabinet opening dimensions, behind-front clearance, and whether any hinges or related installation parts must be ordered separately.
Sold In: 1 Package
