Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rev-A-Shelf sink tip out tray gives you a slim storage option behind a false sink front while keeping the product type and brand clear for replacement or new cabinet work. This self-close sink tip out tray is the Rev-A-Shelf 6541 Series model RS6541-36-15-52 in almond. It measures 36 inches long, 1-11/16 inches deep, and 3-15/16 inches high. The 6541 Series sink tip out tray uses a slim-depth plastic tray design and is described as a sink tip out tray no tab stop style. The 36 inch format is also part of the cut to size sink tip out tray range, with end caps noted in the series description for shorter custom sizes.
Key specs to confirm: This Rev-A-Shelf sink tip out tray is listed at 36 inches long, 1-11/16 inches deep, and 3-15/16 inches high. Buyers should confirm the false-front panel width, the available clearance behind the sink front, and whether the tray depth works around plumbing or sink bowl interference. The product description identifies this as a self-close sink tip out tray in the 6541 Series with no tab stop. The series description also notes that 36 inch lengths are available with end caps so trays can be cut down to shorter custom sizes. If you need installation, load, or compliance details, those must be confirmed with the manufacturer or technical documentation.
What's included: The SAP description identifies this set as 1 tray, 4 hinges, and 4 end caps. The product is sold in each quantities.
What to verify before ordering: Confirm your sink front opening width, required tray depth, tray height clearance, hinge compatibility for your false front, whether you need a no tab stop style, and whether your installation will use the full 36 inch tray or a cut-down custom length.
A self-close sink tip out tray is commonly used behind a false drawer front at the sink where there is otherwise wasted space. For installers, remodelers, and serious DIY buyers, the main challenge is usually fit. The space behind a sink front is often shallow because of the sink bowl, clips, or plumbing. This Rev-A-Shelf sink tip out tray addresses that issue with a slim 1-11/16 inch depth, which is a key verified dimension for tight sink cabinet layouts.
The 36 inch length matters when the false front spans a wider sink base or when a buyer wants one longer tray that can be adjusted to suit the opening. The series description states that 36 inch lengths are available with end caps so trays can be cut down to shorter custom sizes. That makes this cut to size sink tip out tray format useful when the opening is not a standard short width. Before trimming or installing, buyers should still confirm the exact panel width and any interference points because the product data does not provide door thickness requirements, hinge boring details, or minimum clearance dimensions.
The no tab stop detail is also important. A sink tip out tray no tab stop configuration may be the correct match when replacing an existing tray set or when the installer already knows the preferred movement and stop style for the cabinet front. If you are replacing only part of an older assembly, compare the current tray style and hardware layout before ordering. The SAP description lists 1 tray, 4 hinges, and 4 end caps, which gives buyers a verified starting point for what comes in this RS6541-36-15-52 set.
The almond finish and plastic sink tip out tray construction are practical buying details. They help when the visible interior color matters or when the project calls for a plastic tray rather than another material. For service work, specifying the exact 6541 Series sink tip out tray can also reduce confusion when matching previous Rev-A-Shelf installations.
When buyers compare sink tip out tray options, the most useful differences are usually dimensions, tray style, included parts, and whether the tray can suit a custom width. This Rev-A-Shelf tipout tray gives a clearly stated size of 36 inches by 1-11/16 inches by 3-15/16 inches, so the fit check can be done before installation starts. That is often more useful than broad product claims because sink-front space is limited and exact measurements drive the decision.
The 6541 and 6542 Series value line description also helps place this tray within a broader family. The verified information says these trays have a slim-depth design and are available in 11 inch, 14 inch, and 36 inch lengths. For a buyer, that means the 36 inch version is the right place to start when a wider sink front or custom cut-down application is planned. If the cabinet opening is smaller, the buyer should verify whether trimming is appropriate for the project and whether the included end caps match the intended final length.
Another useful comparison point is the included hardware count. The SAP description identifies this set as 1 tray with 4 hinges and 4 end caps. That can simplify ordering when the goal is to get the main tray and related components together under one manufacturer part number. Still, if the job requires a specific hinge style, overlay relationship, or mounting pattern, those details are not provided in the verified data and should be confirmed before purchase.
For buyers focused on consistency, the Rev-A-Shelf brand and the exact manufacturer part number 6541-36-15-52 provide a direct reference for reorder accuracy. That is valuable for cabinet shops, maintenance teams, and installers who need the same sink tip out tray type across multiple jobs without relying on guesswork.
This sink tip out tray fits only where the false front width, behind-panel depth, and height clearance match the listed tray dimensions. Follow manufacturer installation guidance and local building requirements where applicable.
This Rev-A-Shelf sink tip out tray measures 36 inches long, 1-11/16 inches deep, and 3-15/16 inches high.
This Rev-A-Shelf tray is identified in the product name as a self-close sink tip out tray.
This 36 inch 6541 Series tray is described as available with end caps so it can be cut down to shorter custom sizes. Confirm your final fit before modifying the tray.
This sink tip out tray is listed as a no tab stop style in the verified product data.
RS6541-36-15-52 is identified in the SAP description as 1 tray, 4 hinges, and 4 end caps.
This Rev-A-Shelf 6541 Series product is described as part of a plastic sink tip out tray value line.
This sink tip out tray requires checking false-front width, behind-panel depth, tray height clearance, and any sink or plumbing interference before ordering.
The almond finish affects appearance, not the listed tray dimensions. Fit should be based on the measured opening and available clearance.
Rev-A-Shelf sink tip out tray is a practical choice when you need a slim, almond tray set for a false sink front and want the included components identified clearly. This RS6541-36-15-52 set is listed as 1 tray, 4 hinges, and 4 end caps, with a 36 inch length that may be cut down for shorter custom sizes. Before purchase, confirm your opening width, the 1-11/16 inch depth, the 3-15/16 inch height, and whether the no tab stop style matches your installation.
Sold In: 1 Package
