Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Sugatsune MKZ Series satin nickel pull gives you a compact, modern option for cabinet and furniture fronts where a subtle handle is the right look. The pull is part of the Sugatsune MKZ Series, so it fits jobs that call for a consistent design language across multiple doors or drawers. Its satin nickel finish provides a muted metallic surface that helps hide fingerprints and minor marks in everyday use. The zinc die cast construction creates a solid-feeling pull that supports repeat opening and closing of doors and drawers in typical woodworking installations. With an 11 mm center to center dimension, this pull is suited to tight layouts where a small, closely spaced grip is needed. The MKZ-L/SN part number clearly identifies this specific size and finish combination for ordering and for matching existing Sugatsune MKZ hardware on replacement or expansion work.
The MKZ Series cabinet pull uses an 11 mm center to center layout, which guides the drilling pattern when setting up jigs or boring machines for production or small batch work. The M4 x 25 mm screw size spec defines the threaded connection, so installers can match bit size and pilot depth to that metric fastener. The satin nickel finish affects layout in visible areas because its muted sheen coordinates with many hinge and appliance finishes, helping the pull sit visually balanced on doors and drawer fronts. Zinc die cast construction influences handling during mounting, as the material offers a stable feel while aligning the pull over the mounting holes on cabinet faces. The MKZ-L/SN identifier ties these mounting details to a specific Sugatsune America part, which supports repeatable results when the same pull is used across multiple jobs.
The Sugatsune MKZ Series satin nickel pull fits projects using decorative hardware and moldings under the handles and pulls category, so it naturally suits cabinet and furniture fronts in woodworking environments. Its satin nickel finish supports installations in kitchens, baths, and built-ins where a soft metal tone is preferred over high shine surfaces. The compact 11 mm center to center design fits narrow face frames, thin drawer fronts, or small doors where space for mounting holes is limited. Zinc die cast construction positions the pull for use on doors and drawers that see regular daily opening, aligning with typical cabinet hardware demands. As a Sugatsune America product in the handles and pulls class, it integrates into projects that already use Sugatsune decorative hardware, keeping the hardware family consistent on a job.
The MKZ-L/SN part number locks in the exact combination of MKZ Series styling, satin nickel finish, and 11 mm center to center spacing, which simplifies reordering and matching during phased work or later additions. The 11 mm center to center spec defines the exact distance to drill for the mounting points, supporting template creation and consistent hole placement across a run of doors or drawers. The M4 x 25 mm screw specification sets expectations for thread size and length, which helps avoid mismatched fasteners during installation. Zinc die cast construction gives the pull a stable structure during tightening, helping it seat firmly against the cabinet surface without distortion in normal mounting. The satin nickel finish responds well to careful handling during installation, helping maintain an even appearance across every pull in a bank of cabinets.
The Sugatsune MKZ-L/SN is an MKZ Series satin nickel pull in the handles and pulls class, so it functions as a decorative cabinet or furniture handle in woodworking projects.
The 11 mm center to center dimension indicates the distance between the pull's mounting hole centers, guiding drilling layout and jig setup for accurate installation on doors or drawers.
The satin nickel finish creates a soft, low-glare metal appearance, which supports a contemporary look and helps the pull visually coordinate with other satin nickel hardware on the project.
The MKZ Series MKZ-L/SN pull is made from zinc die cast material, giving it a dense, solid feel that suits frequent cabinet door and drawer operation.
The MKZ-L/SN pull is specified for M4 x 25 mm screws, so installers can match drill size and pilot depth to that metric thread and length standard in their process.
The MKZ Series satin nickel pull with part number MKZ-L/SN is manufactured by Sugatsune America, aligning it with the brand's decorative hardware and handles and pulls product class.
The Sugatsune MKZ Series satin nickel pull MKZ-L/SN pairs an 11 mm center to center layout with zinc die cast construction, giving installers a compact, solid-feeling handle for doors and drawers. Its satin nickel finish supports projects calling for a consistent, contemporary metal tone across cabinets. The defined M4 x 25 mm screw specification and clear MKZ-L/SN part number help maintain accuracy from layout through final installation on multi-piece jobs. For work that relies on repeatable hardware choices, this MKZ Series pull fits directly into decorative hardware and moldings projects under the handles and pulls category.
