Patwin Plastics 260 Black Tee Molding, 250 ft L x 7/8" W - 7/64" Kerf - T-MOLD-7/8-260

Black Tee Molding 7/8 Inch For Clean Edges

Black tee molding 7/8 inch from Patwin Plastics, Inc. is a non-toxic polyethylene Flexene molding designed to cover and protect exposed edges while delivering a consistent finished line. The 7/8 inch width provides broad edge coverage, so panel edges are visually unified across runs. The 7/64 inch kerf detail defines the groove size needed, helping the barb grip and stay seated along the edge. Flexene construction lets the molding fit any contour whether outside or inside curves and radii, allowing one profile to follow complex layouts without switching materials. Product dimensions, workability, and color are consistently precise, supporting repeatable results across long jobs and reorders. The tee molding is supplied in 250 foot rolls, giving extended continuous lengths that reduce joints along long edges and support efficient cutting patterns for shop or onsite use.

Key Flexene Tee Molding Details That Matter

• Non-toxic polyethylene construction provides a work-friendly edge solution that supports typical shop handling while maintaining the Flexene performance characteristics at the edge.
• Flexene design fits any contour whether outside or inside curves and radii, so a single tee molding profile can follow varied layouts and curved components in one continuous run.
• Consistently precise dimensions support predictable kerf sizing and seating, which helps edges hug firmly and stay aligned along the full length of the workpiece.
• Consistently precise color allows multiple lengths and future orders of the same molding to visually match, which matters on large runs or phased projects.
• Design that insures the installation will fit firmly and hug edges permanently supports long-term edge retention, reducing revisit work on finished installations.
• Each roll length of 250 feet offers extended continuous runs that reduce the number of seams along edges and improve workflow when edging larger panels or series work.

Edge Fit And Kerf Details For Installation

The T-MOLD-7/8-260 tee molding uses a 7/8 inch width, providing coverage that spans typical panel edge thicknesses and a controlled reveal. The specified 7/64 inch kerf defines the groove dimension required for the barbed stem, guiding saw blade or bit selection so the molding locks into the cut. Because the design insures the installation will fit firmly and hug edges permanently, the barbs engage the kerf and hold the molding tight against the substrate. Flexene material that fits any contour whether outside or inside curves and radii allows installers to run a single continuous length around curves without cutting reliefs, supporting smoother transitions and consistent pressure along the edge.

Using This Patwin Plastics Tee Molding On Projects

Where This Flexene Tee Molding Works Best

This Patwin Plastics tee molding is part of the Tee Moldings class within edgebanding and surfacing, so it is suited to applications where exposed panel edges need both protection and a defined visual border. The 7/8 inch width suits projects that call for substantial edge coverage, from straight runs to built curves. Because the Flexene design fits any contour whether outside or inside curves and radii, the same product can follow arcs, rounded corners, and sweeping transitions across connected panels. The non-toxic polyethylene composition supports use in typical woodworking environments where shop crews handle and process edging alongside cabinets, fixtures, or other surfaced components.

Why Dimensions And Flexene Design Support Results

The 7/8 inch width and 7/64 inch kerf together set a clear interface between the panel and the molding, which aids in planning groove location and feed passes. Consistently precise dimensions help repeated cuts match the molding profile, so seating remains uniform around the perimeter. The design that insures the installation will fit firmly and hug edges permanently reduces looseness at the edge, supporting a straight, tight line after installation. Because Flexene fits any contour whether outside or inside curves and radii, installers can bend around curves without changing profiles, which simplifies layout and helps maintain color and profile continuity. Color precision across production means separate sections of molding visually blend together on the finished edge, supporting a professional appearance over long runs and phased work.

Common Questions About T-MOLD-7/8-260 Tee Molding

Select Patwin Plastics Tee Molding For Edge Runs

The Patwin Plastics 260 Black tee molding, T-MOLD-7/8-260, pairs a 7/8 inch width with a 7/64 inch kerf, giving a defined interface between panel and edge profile. Non-toxic polyethylene Flexene material fits any contour whether outside or inside curves and radii, supporting both straight and curved installations with one product. Consistently precise dimensions, workability, and color support predictable cutting, groove sizing, and visual continuity across projects. For extended edge runs, the 250 foot roll format supports efficient layout and long, uninterrupted lines along cabinet, fixture, or panel edges.