PVC Edgebanding, Color 2422 Gray, 3mm Thick 15/16" x 328' Roll

PVC Edgebanding 3mm 15/16 x 328 For Casework

PVC edgebanding 3mm 15/16 x 328 describes a Doellken Woodtape edge banding roll sized for standard cabinet and furniture edges, so you can cover raw panel edges in one continuous run on typical casework parts. The 3mm thickness gives a substantial edge profile that helps visually match heavier commercial panels, which is important when you want a consistent, built-up look around doors and shelves. The 15/16 inch width provides coverage over common 3/4 inch substrates with a small trimming margin, allowing edgebanders or hand trimmers to flush-cut cleanly without starving the edge. The 328 foot length on a single roll supports repetitive production runs, reducing changeovers on edgebanding machines and keeping color consistent across a full job. The 2422 gray color targets modern neutral schemes, tying panel faces and edges together on commercial or residential projects that specify gray laminates.

Key PVC Edge Banding Details For Projects

• The Doellken Woodtape PVC construction provides a work-ready edge material for cabinet shops using PVC systems, supporting standard trimming and finishing steps in a familiar workflow.
• The 3mm thickness creates a pronounced edge profile that pairs well with robust commercial cabinetry, which is useful where thin edges might look undersized next to thicker doors or tops.
• The 15/16 inch width is sized to cover common 3/4 inch panels with room for trimming, so edges can be processed to a flush finish without exposing the core material during cleanup cuts.
• The 328 foot roll length supports longer production sequences on straight-line or contour edgebanders, helping maintain color continuity from cabinet to cabinet within the same project.
• The 2422 gray color is matched to specific laminate colors, supporting visual coordination between surfaces and edges on cabinets, fixtures, and built-ins.

Edgebanding Size And Gray Color Matching Uses

This PVC edgebanding, identified by SAP description 15/16X3MM EB, GREY 328FT/RL, combines its sizing and color to support casework that uses gray decorative surfaces. The 3mm thickness and 15/16 inch width work together to cover the full depth of typical 3/4 inch substrates while leaving a manageable amount for trimming, which matters when you want a straight, chip-free edge after machining. The gray 2422 color number is tied directly to this size, so once a job is built around this banding, future reorders can maintain the same edge appearance across replacement doors or added cabinets. The continuous 328 foot roll feeds smoothly through edgebanding equipment, providing enough material to process multiple cabinets or long runs of shelving edges without frequent roll changes.

Where This 2422 Gray PVC Edgebanding Fits

Color Matches For Common Laminate Lines

The web description notes that this 2422 gray PVC edgebanding has a color match rated "Good" to Arclin U604 Willow Grey 2422, so when that laminate is on the panel face, this banding helps extend that tone around the edges. It is also listed as a "Good" match to Nevamar S6003 Dove Gray with a T_Textured 2422 reference, tying the texture-coded surface to an edge that visually tracks the same gray family on cabinet parts. For Pionite SG203 Pumice in an N_Suede finish, the match is again identified as "Good," which supports projects that standardize on that laminate while carrying a consistent perimeter color. Pionite SG208 Limestone in N_Suede is described as a "Close" color relationship, which signals that the hue is aligned enough for many installations where an approximate edge tone is acceptable beside that surface. The edgebanding is also documented as a "Good" match to Wilsonart 1500 Grey in a 60_Matte finish, so work built around that Wilsonart color can use this 2422 gray edge to keep faces and edges coordinated.

Why Dimensions And Matches Support Workflow

The combination of a 3mm thickness and 15/16 inch width on this Doellken Woodtape roll gives installers and shop operators a predictable margin for machining, which supports repeatable setup on edgebanders and trimmers from job to job. The defined roll length of 328 feet means estimating material for runs of cabinets or fixtures can be tied directly to linear edge footage, helping plan how many rolls are required for a given project size. Using a specific color number, 2422 gray, together with the manufacturer part number 2422-1503-1 and the SAP description, lets project documentation call out the same edge material for initial installation and any later expansions. The named relationships to Arclin, Nevamar, Pionite, and Wilsonart colors give designers a way to specify coordinated face and edge materials within those lines, which can simplify finish schedules by linking each laminate code to this matching edge banding. Because the web description groups these laminate references under a consistent 2422 gray identification, shops can standardize on one edge color for several related gray laminates, streamlining inventory while still supporting the listed matches.

Common Questions About 2422 Gray PVC Edgebanding

Select This 3mm PVC Edge Banding For Gray Work

This Doellken Woodtape PVC edgebanding in 2422 gray, sized 3mm thick by 15/16 inch wide in a 328 foot roll, ties directly to documented matches with Arclin, Nevamar, Pionite, and Wilsonart gray laminates. Those defined relationships and dimensions let shops and installers align face materials and edges on cabinets, fixtures, and built-ins using one clearly identified edge banding choice from Wurth Baer Supply.